UPDATE on electrical issue and a question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
May 20, 2013
Threads
80
Messages
627
Location
Metairie Louisiana
I found the reason my head lights would not work .I had a burnt wire connector. Now the big question is why did this happen? In the process of tracking this down I figured out the P.O. Did not wire it correctly he some how by passed the HiLo switch. I think this will ultimately be the problem but it's been like this the last four years with no problems. My voltage regulator was acting up so I replaced it I'm not sure if that could have anything to do with it .Then I found a LOT of corrosion on the connector in the light relay could the corrosion cause enough resistance to heat up and burn the wire?
Thanks to the guys that posted possible solutions and what directions I should go in in tracking this down
 
Corrosion will definitely cause a high resistance connection and heat.
I had my headlights go out one night. The fuse looked good, but when checked with my ohmmeter it was bad. Installed another fuse and a few minutes later the same thing. Put another fuse in and watched it. It got so hot the solder melted out onto the floor. Cleaned the fuse panel and no more problems.
 
Thanks guys .I am hoping the problem was just the corrosion. But I wonder a new wiring harness in the future. I wish someone one mad a reproduction one. I don't think coolerman is still doing it.
 
I still build harnesses, but every year in the spring I have to stop to take care of my day job. I will resume harness building in the fall.

What month was your 1970 FJ40 built? If it was built BEFORE 7/70, you are out of luck for a new harness. Some low life copper thief broke into my shop a few years ago and stole all my early template harnesses. The 68-10/69 and the 10/69 to 7/70 harnesses I have never been able to replace.

However, if yours was built AFTER 7/70, I can build you a new one as I have a template for that. Send me a PM and I will give you pricing details. Just keep in mind it will be fall before I can start on it.
 
CarDude, I also have a 6/70. Do you factory power brakes? Just curious. Mine has power brakes and whenever I ordered brake components I was sent the wrong ones. MAF or SOR told me Toyota was consistent in their changeover dates and my tub had to have been changed, but all my numbers check and look original.

One day a coworker bought a local fj40 from a rancher. It had low miles and still had the plastic on the instrument cluster. I noticed it was a 6/70 and had to pop the hood. Guess what...power brakes.

I wonder what the difference is between a 6/70 wiring harness and a 7/70? Maybe the later harness was also incorporated into our rides.
 
CarDude, I also have a 6/70. Do you factory power brakes? Just curious. Mine has power brakes and whenever I ordered brake components I was sent the wrong ones. MAF or SOR told me Toyota was consistent in their changeover dates and my tub had to have been changed, but all my numbers check and look original.

One day a coworker bought a local fj40 from a rancher. It had low miles and still had the plastic on the instrument cluster. I noticed it was a 6/70 and had to pop the hood. Guess what...power brakes.

I wonder what the difference is between a 6/70 wiring harness and a 7/70? Maybe the later harness was also incorporated into our rides.
Yep it sure does but it still has the 9mm brake line fittings.what kind of windshield wipers do you have? I have separate motors with no link between the two .I think PO might have put a older windshield on it but I am not sure.
 
The differences between a 6/70 and a 7/70 are HUGE!
For example: The 7/70 no longer has the terminal blocks on the inner fenders for the bib harness. The 7/70 harness has the head light wiring going down each side. The horn wiring also now goes down each side. No bib lights, wipers were changed to the single motor style, Hazard circuit was updated and the switch is different, and on and on...:D
 
Hmmm. My 6/70 doesn't have bib lights, headlight wiring goes down both sides and I have a single wiper motor.
 
Jeez you have just been a victim of pre-mature MUD posting... :D I did not check my notes before popping off a response.
Lets re-post the proper information....

10/1967 (68 model year): The wipers changed to the single motor with PTO cable to drive the other wiper. Rear tail lights made larger
10/1968 (69 model year): The front turn signals went from round to square, a different Hazard switch was used, the flasher circuit changed,
10/1969 (70 model year) The trapizoidal front apron and rear marker lights were added, the round bib lights were removed, and new dual tone horns were added.
6/1970 was when the brakes went to a dual circuit master cylinder with a vacuum booster. Not sure exactly when the 9mm fittings really changed...

So back to the differences between the 6/70 and the 7/70? Best I can tell, the only real differences would have been emissions related and the addition of the brake low pressure warning circuits in 7/70.

Does your 6/70 have the brake low warning light on the dash? If so then we need to update the history file to reflect that at least some FJ40 built in 6/70 had the brake changes. Maybe California got this before anyone else like they got the 4 speed tranny in 74, and the rest of the country had to wait until 1975. Either of your trucks California models?
 
Mine does have the brake low pressure light. Not sure if it's a CA model. I believe I'm the third owner (1979) and the first two were also in AZ.
 
Jeez you have just been a victim of pre-mature MUD posting... :D I did not check my notes before popping off a response.
Lets re-post the proper information....

10/1967 (68 model year): The wipers changed to the single motor with PTO cable to drive the other wiper. Rear tail lights made larger
10/1968 (69 model year): The front turn signals went from round to square, a different Hazard switch was used, the flasher circuit changed,
10/1969 (70 model year) The trapizoidal front apron and rear marker lights were added, the round bib lights were removed, and new dual tone horns were added.
6/1970 was when the brakes went to a dual circuit master cylinder with a vacuum booster. Not sure exactly when the 9mm fittings really changed...

So back to the differences between the 6/70 and the 7/70? Best I can tell, the only real differences would have been emissions related and the addition of the brake low pressure warning circuits in 7/70.

Does your 6/70 have the brake low warning light on the dash? If so then we need to update the history file to reflect that at least some FJ40 built in 6/70 had the brake changes. Maybe California got this before anyone else like they got the 4 speed tranny in 74, and the rest of the country had to wait until 1975. Either of your trucks California models?

Believe you need to make some changes to your notes. My 9/67 is a 68 model. Front turn signals changed from round to rectangular later. Seen a lot of 69s with round turn signals. Tail lights did go to the third round size until early in the 69 model. Early 69s were the same as the 68s. Even had the early style hub caps. Pads on the hood changed early in the 69 model. 68 and early 69 model were taller than previous years but not stepped with two levels like later thru 74 models. A bunch of changes during the first part of the 69 model and not at the same time. Can't say for sure about the flasher switch but have seen 69s with the same red knob as on the 68 models.
 
Jeez you have just been a victim of pre-mature MUD posting... :D I did not check my notes before popping off a response.
Lets re-post the proper information....

10/1967 (68 model year): The wipers changed to the single motor with PTO cable to drive the other wiper. Rear tail lights made larger
10/1968 (69 model year): The front turn signals went from round to square, a different Hazard switch was used, the flasher circuit changed,
10/1969 (70 model year) The trapizoidal front apron and rear marker lights were added, the round bib lights were removed, and new dual tone horns were added.
6/1970 was when the brakes went to a dual circuit master cylinder with a vacuum booster. Not sure exactly when the 9mm fittings really changed...

So back to the differences between the 6/70 and the 7/70? Best I can tell, the only real differences would have been emissions related and the addition of the brake low pressure warning circuits in 7/70.

Does your 6/70 have the brake low warning light on the dash? If so then we need to update the history file to reflect that at least some FJ40 built in 6/70 had the brake changes. Maybe California got this before anyone else like they got the 4 speed tranny in 74, and the rest of the country had to wait until 1975. Either of your trucks California models?

Mine does have the low warning light of course it's not hooked up along with the reverse light . Thanks coolerman for taking the time to go over this with us.
 
Last edited:
CarDude, I also have a 6/70. Do you factory power brakes? Just curious. Mine has power brakes and whenever I ordered brake components I was sent the wrong ones. MAF or SOR told me Toyota was consistent in their changeover dates and my tub had to have been changed, but all my numbers check and look original.

One day a coworker bought a local fj40 from a rancher. It had low miles and still had the plastic on the instrument cluster. I noticed it was a 6/70 and had to pop the hood. Guess what...power brakes.

I wonder what the difference is between a 6/70 wiring harness and a 7/70? Maybe the later harness was also incorporated into our rides.

This is fascinating! I have never doubted the 7/70 starting date for the brake booster, and have probably also sold somebody the 'wrong ' parts based on what you're saying.
Unfortunately, it's not the first time the microfiche has been wrong.
 
I got so tired of screwing with the brakes that I put 70 series 4WDB axles under it.:grinpimp:
 
Believe you need to make some changes to your notes. My 9/67 is a 68 model. Front turn signals changed from round to rectangular later. Seen a lot of 69s with round turn signals. Tail lights did go to the third round size until early in the 69 model. Early 69s were the same as the 68s. Even had the early style hub caps. Pads on the hood changed early in the 69 model. 68 and early 69 model were taller than previous years but not stepped with two levels like later thru 74 models. A bunch of changes during the first part of the 69 model and not at the same time. Can't say for sure about the flasher switch but have seen 69s with the same red knob as on the 68 models.

I am basing my date information on an October model year change. Of course know one knows for sure what Toyota actully did BUT... I have a theory...:smokin:

Coolerman's Theory

There is no doubt that vehicles on assembly lines got parts installed on them that were from previous "model" month/years. Just imagine that some poor worker is the guy that installs the stamped metal tags we use to know when a truck was built. He is ambitious, so he makes up a bunch of them in advance so that he doesn't have to stop and make more. Or maybe some vehicles got rejected and he has a few left over. The month ends and he has 10 tags left over. Do you think he threw them away? No, he installs those 10 on the next months run.

Now the engineers have designed new brakes for the FJ40. The new parts are delivered to the factory. They are supposed to be used starting 7/70. June comes along and the brake assembly line guys have run short on the OLD brakes systems so they start using the new ones a bit early...

Now, add the fact that dealers might repair trucks using what parts they had on hand, and owners would swap parts out all the time. Multiply that by 5 owners and 40 years of "repairs". So... when the vehicle is sold to a new owner, THAT owner assumes the vehicle is all OEM and we get the :poop: mess that is currently our passion.

We will never know EXACTLY when things happened. All we can do is get close and chuckle when we find the odd exception to our "rules".

We really should start an official thread called "History of the Land Cruiser".
Start with the document that is circulating around about when things started or ended on the FJ40.
Let folks add to it and be peer reviewed for accuracy. It might turn up some fasinating additions to that document.

I vote Living in the Past to start the thread as he seems to have the most knowledge about a lot of this stuff.
 
This is fascinating! I have never doubted the 7/70 starting date for the brake booster, and have probably also sold somebody the 'wrong ' parts based on what you're saying.
Unfortunately, it's not the first time the microfiche has been wrong.


While not sold parts have always read the 7/70 date for the brake booster.

I am basing my date information on an October model year change. Of course know one knows for sure what Toyota actully did BUT... I have a theory...:smokin:

Coolerman's Theory

There is no doubt that vehicles on assembly lines got parts installed on them that were from previous "model" month/years. Just imagine that some poor worker is the guy that installs the stamped metal tags we use to know when a truck was built. He is ambitious, so he makes up a bunch of them in advance so that he doesn't have to stop and make more. Or maybe some vehicles got rejected and he has a few left over. The month ends and he has 10 tags left over. Do you think he threw them away? No, he installs those 10 on the next months run.

Now the engineers have designed new brakes for the FJ40. The new parts are delivered to the factory. They are supposed to be used starting 7/70. June comes along and the brake assembly line guys have run short on the OLD brakes systems so they start using the new ones a bit early...

Now, add the fact that dealers might repair trucks using what parts they had on hand, and owners would swap parts out all the time. Multiply that by 5 owners and 40 years of "repairs". So... when the vehicle is sold to a new owner, THAT owner assumes the vehicle is all OEM and we get the :poop: mess that is currently our passion.

We will never know EXACTLY when things happened. All we can do is get close and chuckle when we find the odd exception to our "rules".

We really should start an official thread called "History of the Land Cruiser".
Start with the document that is circulating around about when things started or ended on the FJ40.
Let folks add to it and be peer reviewed for accuracy. It might turn up some fasinating additions to that document.

I vote Living in the Past to start the thread as he seems to have the most knowledge about a lot of this stuff.


I base my 9/67 date for the start of the 68 based on SOR's date chart. It's been debated if the VIN shown is the start or the end of the month. Going by my four FJ40s post 3/69 with data plaque on the driver's A pillar mine are all based by that VIN being the first one. Then that the 68 had many changes from 67. Upper and lower padded dash, new heater, new head light switch and flasher switch on the dash, all new knobs on the dash, new latches on the front seats, reverse light in the rear corner of the tub, steering box bracket changed so the steering box bolted to base instead of a clamp. Also thought until Mark said 67 that 68 was start of the F145. Also think it was the start of the grey seat cover and horn button was all black with no chrome showing. Going my SOR's chart my 9/67 that I've owned since 7/74 has all the changes stated. While it was well used by the first owner it did not have any mods other than forty pounds of receiver hitch welded on the back.

Based most everything else on my passion for the 40 series that started in 74. Lost track of how many FJ40 wrecks I've gone in junkyards. Sad what the wrecking yard business involved to today. First stage pull all the major parts. Move the rest to the pick-n-pull. Three to four months and it gets crushed. While all the major parts are pulled doesn't matter eles gets destroyed in the process.
 
My FJ40 was advertised as a '68 in Hemmings when I bought it. Also same from dealer who sold it to previous owner. I am wondering if I should buy a set of the older style FJ hub caps. (like dog dishes I hear). Sounds like the changes from '69 to '69 are still in question. Any one know definitively which ones a '68 should have? Thanks.
 
Back
Top Bottom