Something I did not consider when covering my truck and trying to match it to the factory dark green was that the liner material is a light gray. I added 4 ounces of PPG single stage paint as a tint. The 4 ounces was added to the 1 liter of liner. The 1 Liter of gray liner material lightened the final color. As it is the PPG paint was very dark, so getting a darker color would not have changed it much. Adding more tint isn't an option as I needed to leave enough room for the hardener.
The first picture is how the liner came out tinted with the factory 6M1 Dark Emerald Green.
In the second picture you can see the original Dark Emerald Green color prior to being hand sanded on the upper lift gate.
So, with this information, if you were to use a red for instance, make sure it is a very, very dark red to prevent having a pink cruiser.
The first picture is how the liner came out tinted with the factory 6M1 Dark Emerald Green.
In the second picture you can see the original Dark Emerald Green color prior to being hand sanded on the upper lift gate.
So, with this information, if you were to use a red for instance, make sure it is a very, very dark red to prevent having a pink cruiser.
HAHAHAHAHAHA!