Twin Turbo I6

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

875hp JDM kit 1FZ Twin Turbo cost about $8000.00 USD not inlcude tax, shipping and handling.Unfortunately you won't pass the SMOG check or the inspection :frown:
Twin Turbo Landcruiser.webp
TwinTurbo_03 (88).webp
JDM_TwinTurbo_01.webp
 
Last edited:
875hp JDM kit 1FZ Twin Turbo cost about $8000.00 USD not inlcude tax, shipping and handling.Unfortunately you won't pass the SMOG check or the inspection :frown:

So, how do you manage with your setup?!
 
Wouldnt this be a cool setup to have in an 80. Too bad you can't get this motor in the states, maybe the manufacturer wouldnt be close to folding.

What car does this beast reside in? I've never seen one like that before.

....Out of the blue guess: Skyline?
 
Last edited:
I must know what hood that engine resides under. that was beautiful!
 
875hp JDM kit 1FZ Twin Turbo cost about $8000.00 USD not inlcude tax, shipping and handling.Unfortunately you won't pass the SMOG check or the inspection :frown:

I say Bull s***. No way that truck makes that much hp using a completely stock intake manifold and trying to get enough air through that single stock throttle body. I also say that kit would never be available for that low of a price anymore. Maybe 4 years ago when you downloaded that pic but come on Harry, even Slee's AVO system is $8K now-a-days...
 
The 1st post/pic is of a Aus. factory built Ford Falcon XR6 turbo. They are single turbo using a GT40 sized ball bearing Garrett, not twin turbo. 4000cc, 24 valves, make about 245kw/500nm torque, at approx 4.5psi boost. the Typhoon version makes 270kw/550nm.
 
I say Bull s***. No way that truck makes that much hp using a completely stock intake manifold and trying to get enough air through that single stock throttle body. I also say that kit would never be available for that low of a price anymore. Maybe 4 years ago when you downloaded that pic but come on Harry, even Slee's AVO system is $8K now-a-days...

Sorry to say but it's real Mike.About 2 yrs ago, One of the company in Japan (I forgot the name of the co.) The guy emailed me since the truck pushed so much hp the 5 speed manual tranny won't be able to hold it.

Well about the price I dont know now..yeah could be lots $$$$ more..who know's I haven't contact with him since then.

You have to see this MKIV supra motor or '93-'97 Supra TT fitted onto RX-7 body and pushed about 862hp and not big manifold..I wish you see this pic in real life... ;)
Supra_Motor_01.webp
Supra_Motor_02.webp
 
Man, where do you find these things?

That's one helluva motor, although I would never run open turbos. Just a personal preference. ;)

Also, the stock Supra TT block is known to withstand up towards, and at least, 1000 HP. :eek:
 
You have to see this MKIV supra motor or '93-'97 Supra TT fitted onto RX-7 body and pushed about 862hp and not big manifold..I wish you see this pic in real life... ;)
And to think SP Engineering couldn't get that crap to clear the stock hood... what a shame. This guy managed to do it on his own and get it to clear.
Picture009.jpg

Picture008.jpg

Man, where do you find these things?

That's one helluva motor, although I would never run open turbos. Just a personal preference.

Also, the stock Supra TT block is known to withstand up towards, and at least, 1000 HP.
That car is a rather 'famous' show car. As far as the 2JZGTE block... I think people would be suprised to learn just how much money is in those cars... everyone talks like it isn't a s***load but when you lay it out it's insane. Too bad the majority of those cars are dyno queens anyway :flipoff2:
 
Sorry to say but it's real Mike.About 2 yrs ago, One of the company in Japan (I forgot the name of the co.) The guy emailed me since the truck pushed so much hp the 5 speed manual tranny won't be able to hold it.

Well about the price I dont know now..yeah could be lots $$$$ more..who know's I haven't contact with him since then.

You have to see this MKIV supra motor or '93-'97 Supra TT fitted onto RX-7 body and pushed about 862hp and not big manifold..I wish you see this pic in real life... ;)

that is a STOCK supra manifold too. It isn't usually until over 1000HP that people start to look into upgrading the intake manifold.
 
that is a STOCK supra manifold too.
I was going to mention this also but figured it didn't really matter.

106mm turbo anyone? This will be competing in the Outlaw series soon. North of 2200whp... of course not a 2JZ :flipoff2: We have 4 cylinders in 1000awhp territory now anyway.
motor3.jpg


Of course now I've derailed this into a thread with cool pictures..................
I miss cars, but now I've got a truck slow enough that I can't speed enough to get tickets; funny how that works. My LC does 0-60 in about the same time my old DD did the quarter mile :lol:
 
Last edited:
I was going to mention this also but figured it didn't really matter.

106mm turbo anyone? This will be competing in the Outlaw series soon. North of 2200whp... of course not a 2JZ :flipoff2: We have 4 cylinders in 1000awhp territory now anyway.
[im]http://www.t72supra.com/SF/motor3.jpg[/img]

that pic makes me cry. :crybaby:
 
Back
Top Bottom