Try again...Post Head Gasket Issue

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 15, 2006
Threads
83
Messages
803
Location
Ipswich, MA, North Dakota, Phoenix
Last time I posted this I messed it up, so here goes another try.:o ..Just had the HG replaced on my '95 FJZ80, 178,000 miles, smooth runner before the HG job, so smooth that I thought about leaving it alone. Now, at highway speeds, it seems to occasionally slightly "stumble" at random, but fairly frequent (couple of times a minute) times. The dealer scanned it, and got code PO510, saying it was the throttle position sensor, $205. :mad: Told him whoa, we're getting into the parts replacement mode, and after just specding close to $2000, I'll check it out first. I also noticed the idle RPM's don't hold steady, but seem to vary slightly. I know that indicates a vacuum leak, and I'll replace all the hoses, but could that also contribute to the stumbling? This thing is beginning to get irritating. Appreciate any thoughts. Thanks, Ned
 
It's a good idea to clean out the throttle body when you have the head off. That's free.

Also, your computer has to re-learn to how the engine is currently operating, but this should take care of itself in a few days

What did they do to the head while it was off? Are all your plug wires seated properly, dist cap clean? Rotor condition? Did they check the timing?

BTW- I changed your title so more people would read your thread.
 
Thanks for posting this Ken:grinpimp: . Have not cleaned the throttle body, I had the dealership do the work since I'm here in SF without a garage, otherwise I would have done it myself. Had new cap, rotor and wires installed, since they broke my new :mad: wires taking the head off, so that can't be the issue. I'll try cleaning the throttle body when it warms up here a bit. Hate to have others work on my vehicles. Meantime, I guess I'll just keep looking. :cheers: Ned
 
A bad TPS can also produce the symptoms you describe. Test it according to the FSM and see where you end up.
 
Back
Top Bottom