trany mounts

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

When the rubber rips off the steel. (Thats when I replaced mine anyway)
Cheers
 
The mounts are conical when new to allow for compression as wells as torque. When they are flat, they no longer provide compression. Time to change.

Occasionally the washer on the top of the cone will start driving down through the cone while the cone retains its shape. That is another instance when they are ready for replacement
 
Here is a shot of the trans. I guess I should start it up and see if I have movement onthe mounts ???

83 trany .webp
 
The mounts are conical when new to allow for compression as wells as torque. When they are flat, they no longer provide compression. Time to change.

Occasionally the washer on the top of the cone will start driving down through the cone while the cone retains its shape. That is another instance when they are ready for replacement
What are your thoughts on the picture I uploaded ? thnx
 
@65swb45 was referring to the earlier bellhousing mounts not the crossmember mount.

easiest way to check is to jack up on the transfer case while watching the mount and see if it is still 1 piece or it has separated.
 
Back
Top Bottom