Trail Spares... Chat

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

LC_Hamma

The Anti-Leafer
Joined
Nov 11, 2002
Threads
98
Messages
2,656
Location
Dallas, Georgia
Just wondering what you guys think how you view your trail spare parts. If it's a stock LC part & someone else in my group has a spare I may continue wheeling for the day, but if it's a custom part for my rig only, that spare gets me back to camp ONLY. I know what it feels like to hold up the group cuz my custom part broke & luckily, I had a spare.
 
It depends-I broke a rear axle on the Rubicon and had to drive 2 days to get out. I suppose you do what you have to. After the break, I was extremely careful. A crappy trail fix would have me looking to get out as easily as possible, but a with a decent fix, I would keep going.
 
Not a lot of experience with it, but I'd think that if you gotta spend all that time tearing it down on the trail you may as well do it right and make it permanent. Of course not all repairs will work that way, but generally speaking.

My spares would be the stuff that I'd normally replace with at home.
 
Had a pretty heavy discussion about this on Pirate last year. I have made a habit of only carrying very good spares, which of course I would have no hesitation to continue wheeling on. OTOH, if there is a reasonable chance that someone else may need to 'borrow' your spare, that may or may not change your attitude about what you carry.

It also makes a HUGE difference whether or not you know you're gonna be doing expedition type wheeling, or base camp wheeling that is <10 miles from camp.

It also makes a difference who you're wheeling with. I have been in several situations with guys who have 'patched' their rigs back together and I have coaxed them into continuing, rather than turning back, on the theory that they may be a little more likely to break again, but they will also be a lot more likely to still have help.;)
 
i carry multiples of the smaller stuff... like dana 44 u-joints, stubs, hubs... for my '40.... havent really been out in the 55 wheelin a whole lot yet, but i need to get some spare birf's and what not...

bigger stuff like rear axles, and what not i leave in the truck....

basically, if i carry it, if possible i carry 2 of it... like birfs or u-joints, you gotta have one to get home, but chances are someone else will break on along the way too....

i carry all my own rig specific tools and parts, birfs and u-joints i carry one and a buddy carries one.. i would rather have it and not need it that be stranded becuase i didtn want 10 extra pounds...

how much do you guys limit yourself on tools and spare parts weight???

i honestly dont care about the weight, i mean i dont pack huge stuff, a spare 3rd and a spare tire but everything else is relativly, light and small... i'm limited by my cargo area and not weight..

i know some people say, less weight= less breakage, but in a 5000lbs rig with 2-4 people, i dont think 40lbs of spares is going to kill me...

i tend to wheel with people with similar trucks so we can kinda share parts a little if absolutly necessary... birfs/u-joints/knuckles/whatever...
 
Hi All:

From my experience the it fully depends upon the situation; that is, what sort of item broke.

On a weekend 'wheeling trip in September I broke a tie rod end on my FJ40. I happened to have a decent spare along so installed and continued 'wheeling figuring no problems. The next day a buddy had the Saginaw PS gearbox pull-away from its' mount; we scrouged-up some bolts to re-attach it and jury-rigged a brace rod as well. After that we just headed back down to the highway, since we had at least two hours drive home.

Regards,

Alan
Seattle
 
Back
Top Bottom