Tire Crazy

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 20, 2009
Threads
6
Messages
8
Intro: Ok so I snagged my first ever cruiser about a month ago. A 1990 RHD VX limited 80, all the bells and whistles . Guy who owned it before me put a 2-3 inch OME lift in it. It has on it 16x10 mags on it. I want a set of 31's for it, and im getting sooo confused with metric vs imperial tire measurments. What i want is a 31" tire that will fit on the 16x10 rim.... can i do this with the 10 inch wide rim? i cant seem to find anysuch thing as a 31x12.50xR16 or metric equivialnt. Im lookin at pro-comp Allterrains as theres a "buy 3 get 1 free" deal on right now.

Question 1: Seems to me 16" rims are PITA to find tires for... should i switch to 15x10 rim, and get some steelies for now and get some nice 31x12.50xR15's?

Question 2: Recomendation on a good/cheap daily driver tire that has some gravel road, mild 4x4in capability.

Thanks everyone, i think this is my frist post, but ive been around ont he board scopeing out info on the cruisers for a while, GREAT site!
 
Keep the 16" wheels.

With the lift you can go to 315/75r16 TIRES. They should be easy to find and affordable
 
No idea on the Pro comp tires. (Never used 'em, never seen 'em)

I'd stick with the 16's. Not too much difficulty finding tires for them if you know the sizes to look for.

I'm a huge fan of the General Grabber AT2's. My thoughts on them:
https://forum.ih8mud.com/80-series-tech/291656-general-grabber-at2-315s-1997-fzj80.html

Don't know what's available to you locally.



These two links should help you:

https://forum.ih8mud.com/80-series-tech/114057-tire-right-me-faq-tire-information.html
https://forum.ih8mud.com/80-series-...choices-renamed-not-confuse-other-thread.html
 
Why do you want a short fat tire? That makes no sense? A 305/70-16 (that is a 33x12.50-16) would work out well on a 16x10. I have 305/70-16's on my vehicle with about the same lift but on the stock 16x8's. And like was said above, you can run 315/75-16's (basically a 35x12.50-16) you just might have to drop the rear bumpstops 2'' if you are going to really wheel. Here's a pic of 305/70-16's:
On our way.webp
 
And those tires are green friendly re-treads from treadwright. Cost me $477 total for four including shipping to my house! Incredible deal and have worked out great. That is the D/mud tread pattern like the dunlop mudrover with the "ultra grip" ground up walnut shell in the tread that works very well on wet pavement and should work in wintery conditions (though I would not really know since it is an endless summer here in Guam). Pretty quiet for a mud terrain. Heck my wife DD's my truck with those tires on it and she doesn't complain! For the price, when compared to new tires, they can't be beat. Here's the exact link for the 305/70R16: http://www.treadwright.com/shopNowresult.php?tiresizef=305|70|16&submit1.x=42&submit1.y=8. Price went up just a little since I bought them in March 09, but still a great deal.
 
BFG has a 325/60R16 = 31x12.50R16
 
265/75 r16 is just a tad taller than a 31x10.50. Probably closer to a 32x10.60

245/75 r16 is a little narrower than a 31x10.50. about the same height. pretty much a 31x9.80

235/85r16 is less than 9" wide, but taller than 31"-- about a 32x9.50

255/85r16 is over 33" tall, but about 10.2" wide. Very good all-around tire.

285/75r16 is about 33" tall, and around 11.4" wide. A very popular tire size.

The metric tire sizing is done like this:
the first number (255) is the tread width in mm. 25mm=1 inch.

the second number is "aspect ratio". basically: 65 or 70= fat tire, 75="normal width", 85="skinny tire". This is all relative to the height.

The actual formula is that the 75 means that each sidewall is 75% the width of the tread. So on a 255/85, the tread is 10.2", and the sidewall is 8.67" (10.2x85%). So the height will be two sidewalls, plus the wheel
= 8.67+8.67+16=33.34" tall.

Again, as a rule of thumb: 70, 75, 85 are the "common" aspect ratios. Pick the width you want- 245, 255, 265, 285, 295,305... then decide if you want "tall n skinny"=85 or "flotation"= 75 or "fat"=70.

And.... there you go.
 
wide rims + low pressure = tire falls off easier.

narrow rims + wide tire + low pressure= tire stays on better.

16" rims with a "33x12.50" tire should hold it maybe a little better than 15" at the same psi, because there is less sidewall to flex (1/2" less sidewall) but not much of a difference.

search for "tall and skinny" or "what tire size" and you'll find enough info to keep you busy for a week or three.
 
Your rig will look like a skateboard with the ome lift and 31s (or even 32s). If you want to improve your mpg and street performance then you should swap your 10" rims for 16x8s so you can fit a narrower 31 or 32 inch tire and swap your springs for the lower ome 861+862 units.
 
16x8 is a good size...stock on my 96 LX-450....Im running 305-70-16 (33inch tall)I wouldnt go wider.

I would get rid of those 16x10's rim's unless you put on a 35inch tall tire or bigger

Though it sounds like you want to run 31inch tires.......... so un-load those 16x10's, just to wide bro!
 
ome 'heavy' with 31" tires
DSC_6065edit.jpg


taller look better. If you spend any time on the highway at all, taller will probably give you better mileage.

I'd go 265/75 or taller if I had 16" rims.

here's another shot w/ 31's and OME lift
junqIMG_1144.jpg


I think "skateboard" is an exaggeration, but my next set of tires will either be 255/85r16 (the expensive option) or 33x12.50r15 (the cheap option)
 
Sandcruiser-that second pic is amazing! Wish I could drive up to a beach like that in my backyard!
 
there are soooo many beaches here that are even prettier. Its a spectacular country
Not all of them are this easy to drive to- but some are easier.
 
if you're looking at changing rims to save on tires...you'll just eat up said savings on the rims.

x2 on running 265/75 R16s. this size is just a tad taller than the stock 275/70 R16 stock size at just under 32" tall and will give you great acceleration and braking performance, like the 31" tires you mentioned. 265/75R16 is a very common tire size and I am sure you can find a good deal on them, no matter what country you are in.
 
Back
Top Bottom