Thrust Size Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 25, 2020
Threads
48
Messages
153
Location
Clifton, Virginia
Having my 1982 2F engine machined. I am completely new to engine rebuilds and still learning so I apologize for my ignorance.

The the machine shop guy asked me a question that I don't really understand--hoping someone can help me out. The question is: with this engine's main bearings does thrust size increase when using undersize bearings?

Any help/info would be great. Keep in mind I'm a total noob when t comes to engine rebuilds. Thanks!
 
There's no confusion. All F/2F cranks will fit in all blocks.
All F/2 blocks will accept the 1-piece thrust bearings.
The 85-later blocks have a tang machined out to accept the torq tang on the separate thrusts, but the earlier thrusts still fit.
The only architectural difference in cranks is the smack-on balancer or the bolt on balancer.

Re: the thrust machining. Some replacement undersize bearings have thicker thrust shoulders which requires machining the crank thrust to fit, just as the other bearings will need machined to fit undersize bearings. The factory thrust dimension does not change.

HTH.
 
Thanks so much! That was exactly what my machine shop guy needed to know. Really appreciate your time and expertise!
 
Back
Top Bottom