Throttle Cable advice needed

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 4, 2007
Threads
5
Messages
39
Location
Fiji
Just need some quick advice on throttle cables. Mine is in a pretty sorry state, the casing is mostly gone and it's a chore to even push the pedal. I have read many thready where says lubricating should do the job but I'd just prefer a new one. I have had the pump (1HD-T) overhauled and next are axle seals and possibly (hopefully not:crybaby:) new knuckles (e.g. birfields?), so new would be nice. Now the actual question:

In my former automotive life (pre LC) I had good experience with universal cables from B&M, Lokar and others on V8s. Now, what do more LandCruiser experienced people think how they compare with an original Toyota spare? Universals are cheaper but is the original worth the extra expense? Maybe Toyota does some extra Voodoo to make their cables better, who knows?:hillbilly:
 
If you want it to fit and last another 15 years then I would by a Toyota part. Cheaper doesn't appeal to me when it comes to something like the throttle cable when a failure means I walk and walking home from Fiji could be a challenge.

-B-
 
-B-, that entirely depends on how good your scuba gear is!

And I forgot to mention that the Cruiser has Cruise Control. Hmm, a LandCruiser with Cruise(r) Control... I am sure somebody already made that joke
 
when I had my 4WD Toy P'up, I had a throttle cable break off for some unknown reason. I had used the brake cable off my friends mountain bike as an emergency fix to get home. Then immediately replaced with a Toyota replacement. Suggestion, use OEM.
 
Weeeell, two posts and I guess I have made up my mind. OEM it is, now to explain that to the Chief Financial Officer....

NLXTACY, it may be an old thing by now, but I nearly wetted myself reading the FJ60 story of yours, sh*t, that could ahev been me!!!
 
HAHA yeah that story actually keeps on growing. I will be updating it soon. Problem is I have a Yellowstone trip (just got home) report to write and about 3 new FAQ/HOT-TOs to write that I have been dying to do. But yeah, I need to add to that thread because there has been more comedy since I last posted.
 
When you do receive the new throttle cable, adding a protection layer of heatshrink tubing may help it last longer. My cable on my '94 has no insulation to speak of but is smoother than a '95 which has a few sections of insulation missing. (Both are being replaced with Toyota, getting too old to rig/modify things that might not work properly as OEM does.)
 
I just orded OEM accelerator cable from cruiser Dan...wouldnt use anything but.
Scott
 
Ehem, everybody... I am just off the phone with the Toyota dealer here, they want F$550 for the complete cable assembly... what are they made off??? Boron- Titanium with Kevlar Carbon casing? WTF???

I will go now and try to get the last out of my cable, whatever it takes. This is Fiji, I have put Toyota Crown brakebooster and master cylinders as well as Ford tractor seals (pinion seal, worked better then the original) into my Holden, amongst other things, I put Chrysler parts into my Cruiser and I will find a solution if this one gives up the ghost...

I normally absolutely agree with you guys about OEM, but sometimes you can't and sometimes you don't want to, and I am not spending F$550 on 2.5 feet of cable! Here comes the grease and the gaffer tape, LandCruisers beware!!!!!
 
Yep, isolated island with the Toyota South Pacific Headquarters just around the corner from my place... but not to worry, as I said, there has to be some life left in the old cable. Just try and if nothing works I'll give Dan a call. Having said that, the postal rates from the US to Fiji is equally exorbitant... all the more reason to get it working again and not to be lazy and buy new stuff *little hype- myself- up speech*

The pump overhaul already cost me F$300, that's cheaper than in the States from what I read, go figure.

Oh, I mentioned my Holden earlier and before as well. If somebody is interested, here is a pic. Should have NEVER sold it
Fiji350.webp
 
I am showing that $80 cable would be about F$128. Maybe add another F$100 for shipping to Fiji so you should come out way ahead.

It might make it easier for Dan if you can look up the 1HD part number before you call. Hopefully the price will be close to the price that Beno has.

-B-
 
Alright, I have disassembled the whole cable and cruise control. The cables are NOT the problem. As it turns out, the mechanic working at the Diesel Service shop has tightened the castellated nut of the pump linkage one slot too tight. Ergo the linkage was binding. Let's file that under "beginners mistake"

Thnaks for everybody has given good advice, teaches me a lesson of "check more, post less at mud"
 
teaches me a lesson of "check more, post less at mud"

I wish everyone on MUD in the 80 section would spend more time in the archives searching. Almost every question regarding the engine, tranny, front axle, rear axle, ignition, electrical, modification-wise has been answered on MUD in the past 5 years.

If you are specific with your search, you will find what you need.

Also, spend time looking at the links in the FAQ section that Romer and Reffug have spent considerable time developing. Almost every maintenance/modification/4 bananna work is explicated here.

Unfortuntely, everyone is too lazy to search or spend time looking.

Cheers.
-o-
 
if everyone just looked at the archives, think of all the belly laughs we would miss!
 
Back
Top Bottom