Thoughts on OZ sealed beam conversion

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 30, 2006
Threads
103
Messages
3,952
Location
Utah
I've been thinking about this way too much :lol:

Want to convert my headlamps to the OZ-spec quad-light sealed beams, mainly cause I think they're cool. Since the lights are just standard sealed-beam units, could I use upgraded bulbs in semi-sealed[?] housings? I've seen BMW guys run 100/55W H4 outer low/highs and 100W H1 inner highs, would this be feasible in the 80 setup?

I know it will cost a bit of money, I've been pondering this for quite some time.

Semi sealed units for the 80: http://cgi.ebay.com.my/ws/eBayISAPI.dll?ViewItem&item=250446924146



attachment.php
 
Last time this was hashed over, consensus was, that while it looks cool, the US headlight is superior in actual use.
 
The Aussie spec lights are terrible. A lot of guy's here put HID inserts (even though they are illegal) in because the lights are so bad. I would look at keeping what you have.
 
I've been thinking about this way too much :lol:

Want to convert my headlamps to the OZ-spec quad-light sealed beams, mainly cause I think they're cool. Since the lights are just standard sealed-beam units, could I use upgraded bulbs in semi-sealed[?] housings? I've seen BMW guys run 100/55W H4 outer low/highs and 100W H1 inner highs, would this be feasible in the 80 setup?

I know it will cost a bit of money, I've been pondering this for quite some time.

Semi sealed units for the 80: eBay.com.my: Landcruiser 80 Series Set of 4 Quartz Halogen Headlits (item 250446924146 end time Jun 23, 2009 14:50:52 MYT)



attachment.php


Lane,

Those lights would work for the 80 but wouldn't you still have to get the brackets/bezels, and the corner markers?

Yes, I do agree that they're cool to look at because they're almost non-existent(sp) in the US, but from what I gather they leave a lot to be desired for performance. (And hence this thread, I ghess, eh?)

I think Tapage would chime in with his opinion when he see this thread.

I think an importer in Canada was offering the quad-light conversion kit with (projector low?) HID's. It looked somewhat funky with the projector, but that would probably yield the best performance for those lights. Of course the price tag was north of the $1k line. :eek:

BTW, I think the semi-sealed units would be able to withstand 80-100w w/o any issues if they're metal/glass. (No personal experience though).

Why don't you see if you can pick up the 62 front facia and see if you fab it up to your rig or something? :hillbilly:

G'luck!
 
Back
Top Bottom