This is what happens when.....

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

OGBeno

11101-59235
Moderator
GOLD Star
Joined
Aug 28, 2004
Threads
348
Messages
36,686
Location
Patagonia, Arizona, USA
...you blow a u-joint at 75 miles an hour on the highway. :eek: :eek:

Ouch. A buddy of mine called today who has a 96. He said that his truck went bonkers yesterday and it is sitting at a tranny shop in Akron. I hop in my truck and head down to Akron. Lo behold the damage below. This is what happens when you starve a u-joint from grease. The rear drive shaft has tons of play at the xfer case end as well. Luckily, the xfer is fine, I am giving my buddy an extra front drive shaft that I have and we are getting the rear drive shaft rebuilt next week with OEM parts.

Used 343 is on the way from New Hampshire and we'll be R & Ring the tranny next week. Drive shaft basically went right through the valve body and pan and cracked the entire casing all the way around. Basically a junk tranny now. The crack is about 1/4" wide and basically unweldable. If anyone wants parts from it, let me know via PM.

Best regards.
-onur
Oberlin, OH
P1160004.webp
P1160005.webp
P1160006.webp
 
Holy flippin heck that thing didn't go down without a fight. Was he running an extreme driveline angle or something?
 
That was an expensive U-Joint :eek:
 
Wonder how many folks are either out right now or will be in the morning checking their U-Joints? :)
 
Stock truck.

My buddy had been getting vibrations for awhile and some clanky sounds. He checked things out and things seemed fine.

What I am guessing is that the c-clips that are wedged between the spider bearings and the yoke got corroded away in the OH salt along with a combination of lack of lubrication making them break off or come loose. The truck has about 125K on it.

The "new" used 343 will be a baby at about 64K miles. The price was reasonable from James as well.
 
And gave plenty of warning before going.

...to folks like us who watch/listen for such things.

I remember a newbie reporting a similar incident sometime in the last year. S/He reported, "The mechanic said a u-joint went out and now I need a new transmission." :eek:

Needless to say, pic's were requested, and were subsequesntly produced. Looked eerily similar to the above.


Curtis
 
Good God man someone buy him a grease gub. Just for kicks what level of cost are you projecting to get him up and running?
 
ironic...I just greased my ujoints and slips about three days ago. I hadn't done it in a awhile...No vibes or clunks it justfelt like the thing to do....I think I may take a closer look at those pieces just for kicks....
 
ironic...I just greased my ujoints and slips about three days ago. I hadn't done it in a awhile...No vibes or clunks it justfelt like the thing to do....I think I may take a closer look at those pieces just for kicks....Maybe thos monster truck requirements associated with containing a shaft aren't so loco....
 
I'm working hard on my friend to become more knowledgeable about his truck and to work on it...I don't necessarily think it was conscious neglect on my friend's part. It was just no knowing....you have to realize that there are way more people who are not like us and who could care less about the vehicle as long as it is up and running. People on MUD are the rare exception--not the rule.

That said, money wise, a used tranny is running about $750 + shipping, a drive shaft is another $50 (friend price from my own stock of drive shafts), new ujoints-$80, R/Ring a tranny is about $300, fluid, etc. another $50, so for a total of $1400 or so.....
Best.
-onur
 
Back
Top Bottom