The OFFICIAL Post-FG Thread!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Maybe its time for an FJ40 : )
 
Looks like a great time had by all. Hopefully i'll have my junk together in time for next years event.

Can anyone tell me more about this truck or point me to a build thread?

YankeeToysFG_07_12.jpg
 
That's a buddy of Mark Waller and Mike Fox's.. the rig is REALLY clean, dual cases, and that NICE exo which is tied into the rear bed in a very cool way. We DEFINITELY need to know more about that rig. :)
 
Belongs to Matt and Jen.
Both of them were driving at F&F,
Real nice Runner and very capable!
A future ROTM?
 
That's a buddy of Mark Waller and Mike Fox's.. the rig is REALLY clean, dual cases, and that NICE exo which is tied into the rear bed in a very cool way. We DEFINITELY need to know more about that rig. :)

I like the front exo that ties into the sliders. Looks like a good starting point to "flat fender" a 1st Gen. I'd like to see how the rear rails are tied into the bedside as well. Other than that i'm not a huge fan of all over Exo-cages. But I do like those two aspects of that one.
 
I've got a tiny bit of video I'll try to get up (the more I wheel, the less I video...)

anyone who got pics of my Sami, I'd love to have any fullsize shots - stockerboy@gmail.com
 
A 40 in Meriden I don't know about??? Let me know when you want to wheel local. Always looking for someone.
 
Eye candy for even the most jaded Cruiser guy:
IMG_1294.webp
IMG_1317.webp
 
"Stock" runs on legal roads, Bill, Joe and Jose:
IMG_1314.webp
IMG_1301.webp
IMG_1311.webp
 
More stock runs. Playing in the mud, and Kim learning to drive the FJ Cruiser (press the magic button and keep in the throttle :lol:).
IMG_1329.webp
IMG_1324.webp
IMG_1310.webp
 
anyone make it through the bog there? Seen it stop many a well built rigs.
 
Those are roads? LOL
 
anyone make it through the bog there? Seen it stop many a well built rigs.
Yea did Tim make it?
I went in there once, cost me about $300 after replacing the alt. starter and clutch.
The fine mud got into everything and destroyed it all.
IH8MUD!
 
The fellow in the 80 made it across from the far side. He was stuck for a bit, but after beatin on it some more, he got free.

The Dude in the blue 40 made a lot of noise, then got stuck. He got winched out.

I saw no point of making the hole deeper and getting my stuff all dirty. Not really my idea of fun. Alot of the rocky trails were fun though.
 
Looks like a great time had by all. Hopefully i'll have my junk together in time for next years event.

Can anyone tell me more about this truck or point me to a build thread?

YankeeToysFG_07_12.jpg


The runner is mine, I can start another thread or do ROTM if you like. I just need to fix my my computer at home first to get all of the pics. If there is anything you would like to know right away P.M. me.

Jen and I had a great time and met alot of great people. The trail system was nice and had a good veriety with off shoots everywhere so there was always something to try ( eventhough I shouldn't have tried some of them :D ). Thanks to everyone who made this event happen.

Matt
 
The runner is mine, I can start another thread or do ROTM if you like. I just need to fix my my computer at home first to get all of the pics. If there is anything you would like to know right away P.M. me.

Jen and I had a great time and met alot of great people. The trail system was nice and had a good veriety with off shoots everywhere so there was always something to try ( eventhough I shouldn't have tried some of them :D ). Thanks to everyone who made this event happen.

Matt

I'm in no rush, but I'd like to see pics of how you tied the sliders and rear part of the Exo to the body when you get a chance. :D
 

Users who are viewing this thread

Back
Top Bottom