The Daily Chat Thread

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

CRAP!

A couple serious safety issues with my 40 have been discovered and I'm in the process of repair. (More details in Today's Wrenching). Unfortunately, it is going to be really tight to get all the parts here and then installed in time for the FG. I was hoping to be able to bring it along with the FJC, but now I'm not so sure. :mad:
 
Today abused the 80 pretty bad, bent lower control arm, crushed gas tank skid and muffler, dented in door more, cracked both tailights, leaking rear diff now, and I will find more tmrw upon further inspection. So now I need to think on some fixes for some weak points.
 
"So now I need to think on some fixes for some weak points."

I have always found that I'm the weakest point when something fails or gets damaged. Just sayin' :grinpimp:
 
Damn, I'm a Traitor because I drive a Toyota.

I was at the parts store today picking up the brake shoes for the 40 and was closing the back door on my FJC when a guy next to me in a Tahoe noticed my Veteran's plate. I see you have a flag on that plate, he says. Yes, I said expecting him to acknowledge my service and then get into when he served. Why would you put that on a truck like that? I said, what do you mean? He said, that's a Jap made truck. That's treason, they were our enemy in WWII. (He was way too young to have served in WWII, I have mucho respect for those that did and can understand some of that prejudice.)

I was too taken aback to really get into it with him, but I did ask him if he thought his truck was 100% made in the US. He responded that it was made in Flint, Michigan by Union workers. I said, you might be surprised how many of the parts for your truck were made in other countries, or even the truck itself. Then I left.

On the way home I thought I should have said GM now stands for Government Motors since we taxpayers bailed out a company brought to its knees. Also that a small percentage of GM is now owned by the ChiComs and there is an agreement for GM to give the Chinese technology in exchange for a tax break to sell a few Volts in China. They can't sell them here, so why not?

And then lastly, I should have said that I was happy to have served to protect your ability to have free speech and insult a fellow American for no f'ing reason. And if that didn't go well with him, then I may have had to show him there were a few moves that I remembered from serving and kicked that horse's ass. :deadhorse:

I'm as Patriotic or more so than many, so this didn't set well with me. It was just one more thing to add to a day that wasn't going well to begin with.
 
Thanks! Some people are just naturally grumpy I guess.

By the way, my rice burner Valk was made in Ohio, same as yours.

:cheers:
 
FG Beers

Decided I give the can beers a chance this year. Went to our local beer store and picked up some from
this brewery.
Oskar Blues | Home - Oskar Blues
Got the Dales Pale ale and the Old Chub Scotch ale.

If you are inclined and coming thru Keene this place has a great selection of craft
brew and they are open until 10pm.
brewtopianh.com - Home
 
What's a head gasket job on 2F run these days? Looking at a truck that may need one.

Sent from my iPhone using IH8MUD
 
Decided I give the can beers a chance this year. Went to our local beer store and picked up some from
this brewery.
Oskar Blues*|*Home - Oskar Blues
Got the Dales Pale ale and the Old Chub Scotch ale.

If you are inclined and coming thru Keene this place has a great selection of craft
brew and they are open until 10pm.
brewtopianh.com - Home

I had those last year and they were really good. This year it's a case of Yuengling Larger in cans, $17.99. I actually enjoy that stuff on draft when it's real cold.
 
Beer is one of my favorite subjects. There is a new Market Basket that opened near us and the beer distributors have everything on sale along with all the other suppliers. There are light domestic brews on sale after the instant coupon for only $7 an 18 pack which is pretty much what they are worth to begin with. I'm pretty much in heaven if I can drink beer at 50¢ a pop and $1 or less for the good stuff.

I bought a variety of better 12 packs and sample 12 packs including domestic craft brews and a German import that I can't remember the name of. I'm up for a beer tasting party on Friday night if you guys are. Open a bottle and everyone gets a 4 ounces in their cup and a chance to comment or complain.

Who's in?
 
What's a head gasket job on 2F run these days? Looking at a truck that may need one.

Sent from my iPhone using IH8MUD

Are you doing the head or just the gasket?
I did one (not an FJ) where I didn't even take off the manifolds or carb. Just disconnected the exhaust, hoses and wires, lifted the head, slipped in the gasket and torqued it down. I got lucky because the head was flat and not cracked. I've also done them where I take the head out and have it inspected, ground, valves and guides done, etc. Latter would cost 3-4x what the former would.
 
edwjmcgrath said:
Are you doing the head or just the gasket?
I did one (not an FJ) where I didn't even take off the manifolds or carb. Just disconnected the exhaust, hoses and wires, lifted the head, slipped in the gasket and torqued it down. I got lucky because the head was flat and not cracked. I've also done them where I take the head out and have it inspected, ground, valves and guides done, etc. Latter would cost 3-4x what the former would.

Not sure what needs to be done. The engine was recently rebuilt. This is what the owner emailed when I asked if he was certain it needed a head gasket...

"All I know is that is has low compression in 3 cylinders. My mechanic made that assumption based on the fact it had blown the head gasket the first time and having replaced all the pistons and connecting rods in the rebuild, would seem that since the engine was running and drivable that that may be what has happened again."

So who knows. I'm just trying to figure out what a worst case scenario would be cost-wise if it did indeed need a head gasket.
 
Back
Top Bottom