TG 78" Rockslider

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 16, 2015
Threads
23
Messages
117
Location
Philipsburg PA
Thinking about grabbing a set of these rock sliders. They are from the extended cab pickup truck. Anybody have any pictures or tips for getting around the cats on passenger side? Or is there a better option for the around that price?

Screenshot_2016-12-02-12-12-50.webp
 
Have a pair of extended cab sliders myself...not trail gear but same scenario. I used a harbor freight pipe bender and some heavy wall DOM I had laying around to make the legs that go under the cat. Something like 15*-20* of bend on either side of the cat. Worked great.
 
I honestly don't remember how long the legs were that came with mine, I was able to use a couple but had to buy some 1.75 x 0.125 wall DOM to make most of them. I think the piece I used under the cats was 1.5 x0.3?? Wall DOM I used the notched end of a leg welded to the slider and inserted the bent leg I made and rosette welded it in place. As far as how far from the rockers...I trimmed the pinch weld and tacked it up and left a minimal gap. I had planned on adding a 1" body lift at some point but haven't. I think the main tube sits under the rocker bottom about .750" I used a chunk of UHMWPE I had laying around to space them.
 
I've seen a few posts saying they were frustrated with the fitment of the OPOR sliders. I have the OPOR sliders, and found them pretty easy to simply bolt on. At the sale price, they are a stunning deal!
 
Back
Top Bottom