TBI adapter plates.

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Thanks, I am obviously new to the board, at least as an active participant.

Thanks for the information.

ROB
 
yeah, I am interested in Mike adapter. I do have the aluminium to make my own, and I will try that, but if that doesn't work, or I screw it up, I will buy Mikes adapter.
 
ToyotaJeep said:
Thanks, I am obviously new to the board, at least as an active participant.

welcome :D :flipoff2: :D

hell, I'm a noobie myself now, just brought an 80-series home.... :beer:
 
I have actually a fair amount of Yota under the belt, but I am approaching this truck differently. Previously, I had a 55 and I did the shackle reversal and a bunch of other things to it, including a homebuilt 40 gallon tank.

This led to a 40 which I did the entire frame off thing and SOA with Saginaw and a 420 etc. All of this with a lot of mini-truck things on the side. Lots of mini's.

All this leads to my current 73 FJ40. It is new to me and I think I will try somthing less modified than the past.

Like a TBI stock motor with a Chevy 4-speed and that type of thing. I teach shop at a small school and we are building a rather cool (at least I think so) Willy's Wagon with approximately 40" tires etc. No more details on the Jeep since I don't want to be run out of town!


The truth be known, I would like to put the Mercede's diesel in my Cruiser. I have the donor car, but finding good adaptor infomation is proving difficult.

Sorry for the long post.

Have a good day, ROB

It's not bad being a NOOB! You just don't want to be one on Pirate's!
 
ToyotaJeep said:
Like a TBI stock motor with a Chevy 4-speed and that type of thing. I teach shop at a small school and we are building a rather cool (at least I think so) Willy's Wagon with approximately 40" tires etc. No more details on the Jeep since I don't want to be run out of town!


The truth be known, I would like to put the Mercede's diesel in my Cruiser. I have the donor car, but finding good adaptor infomation is proving difficult.

QUOTE]

There are a couple of shop teachers here. In fact, I just put a diesel in a Cruiser, but I went the easy route and did it with a Chebbie.
 
Yeah 4x4labs is working on it, but they are not done yet apparently. I have thought of the Chevy and all the others, but the Mercede's looked the coolest, plus the redline is probably the same as a stock cruiser. Very smooth shifting auto as well.

I am not in a huge hurry, so I figure I can wait for awhile and see what turns up with adaptors.

ROB
 
as the hyjack continues...

Badlands offroad in IN had a Sammi with a Mercedes diesel for a while...guess it was absolutely awesome offroad, but never saw it in action. Guessing Troy did a custom adapter of some sort, or perhaps the stock divorced sammi t-case behind a mercedes trans....
 
I'll be in for two of the adapters when they are ready Brian...


Just trying to support the system...


:beer:



Good luck!


-Steve




Oh,


Jason....


I am pretty sure I have a 'Cruiser PTO box if you are interested...
 
3 speed or 4 speed?
 
always a good sign when your only voicemail of the evening is your machinist looking for a drinking partner....and then wanting to know how well the alum skid he cut for you is working....

Bailey, I use Priority Mail for all mine, wrap the adapter in paper or bubble, stuff it into the USPS one rate envelope (perfect fit), and it's $3.85 for 2nd day....cheap and quick, and I usually do the confirmation too so I have some method of tracking.
 
ToyotaJeep said:
Yeah 4x4labs is working on it, but they are not done yet apparently. I have thought of the Chevy and all the others, but the Mercede's looked the coolest, plus the redline is probably the same as a stock cruiser. Very smooth shifting auto as well.

I am not in a huge hurry, so I figure I can wait for awhile and see what turns up with adaptors.

ROB

MB is way cooler. The redline, hp and torque numbers for the 6.2 are all very close to a 2F. It pulls way harder though. :D
 
It is really weird being a kinda non-diesel guy how the MB pulls. I just got back from the diesel shop today and they were all cussing at the MB stuff. I guess everyone has an opinion.

I don't want to be a hijacker, so I'm back to lurk mode for the time being.

Thanks, ROB
 
Status of the 2f TBI plates?

Are the TBI plates available yet? I would be interested in one to go on my 7340.
 
TBI plate

Thanks for getting back to me. Put me on the list. Hmmm, a month? That would still give time to have it ready for Rubithon. Yea, Right! Not with the way things go for me.
 
Back
Top Bottom