Tailgate electrical parts question

[Dogdoc90]

I’m rebuilding my tailgate window regulator from scratch and am puzzled by a couple parts. My fj55 schematics show a circuit breaker and a relay under the dash, drivers side and what I have doesn’t match what Gary S posted a while back regarding tailgate electrical rebuilds (incredibly valuable information by the way). Here’s what I’ve got but I just don’t know if these are just another version of these parts or what. If so, does anyone know the wiring configuration? Thanks

 

[Dogdoc90]

Here is a picture of the tailgate circuit breaker that should be up under the dash:

Picture didn’t attach. I don’t think I have either the circuit breaker or the relay. Do you have any or can new sources do the job?

 

[J Mack]

My fj55 schematics show a circuit breaker and a relay under the dash, drivers side and what I have doesn’t match what Gary S posted a while back regarding tailgate electrical rebuilds

Assuming this is for your 1970 FJ55 my schematic shows no relay pre 1972.

 

[J Mack]

 

[Dogdoc90]

This thread has some information about the tailgate circuit breaker:

x

forum.ih8mud.com

My quick rescan doesn't show a rating. I would say it could be replaced by an appropriately rated auto resetting circuit breaker. I will probably be doing so on my two newest 55s. But they aren't full restorations.

Just checking in on my parts order and final cost estimate without the heater for tailgate parts etc. thanks

 

[Dogdoc90]

Just checking in on my parts order and final cost estimate without the heater for tailgate parts etc. thanks

Here is the door lock image from my retainer clip question.

 

[scrapdaddy]

Just checking in on my parts order and final cost estimate without the heater for tailgate parts etc. thanks

Here is the door lock image from my retainer clip question.

You kinda lost me here, what order and what clip question.

 

[Dogdoc90]

You kinda lost me here, what order and what clip question.

Sorry, that was supposed to be for lil John who’s helping me with parts.

 

[Dogdoc90]

He's got a bunch of parts coming from my stash

I'll double check my pile to see if I have the retainer that goes around the lock rod and holds it to the lock tab.

Thanks

 

[fj55-100]

my current one ,that i would kill to have another ,. made by James doh . quite a few years ago