sway bars

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 7, 2003
Threads
402
Messages
13,956
Location
lebanon,pa
Website
www.facebook.com
are they required or otherwise strongly recomended on mildly lifted 80s?
looking at an oem 2" medium/heavy. and see no mention of anti sway bar extensions. does that mean i can ditch them?:hillbilly:
on any of the other trucks that i've had, i removed them after a lift was on it. everything always worked out, but i've never had coils on all four corners.
 
I have ridden in 80s with the sway bars removed. They get unreal body roll, especially with the front out. I would not delete the sway bars. Slee sells the sway bar extensions you need.

If you only plan to drive offroad, you'll get away with no sway bars. If you plan to use it on the highway, the sway bars will make it handle better, especially in emergencies.
 
I drove from Lake Tahoe to Shingle Springs without swaybars after doing the Rubicon. It was a little freaky, but also not horrible. That said, I would 100% recommend you keep yours on until wheeling, then pop 'em off and reinstall asap after returning (as we did.)

Dave
 
I have my front on, rear removed with no issues, but I dont let many other folks drive it either.........
 
teh wifey is pretty fond of it.....

then keep them on, I picture my wife driving one handed in the fast lane with cell phone to ear drinking a coke at 80mph............so she does not drive it except on the trail...........she will get a UZJ-100 someday
 
Is there a quick release setup for the sway bars on the 80?
 
are they required or otherwise strongly recomended on mildly lifted 80s?
looking at an oem 2" medium/heavy. and see no mention of anti sway bar extensions. does that mean i can ditch them?:hillbilly:
on any of the other trucks that i've had, i removed them after a lift was on it. everything always worked out, but i've never had coils on all four corners.

Just get yourself two short sections of 2" square steel tube and make your own drop brackets for the front sway bar.

$5.00 and you're good to go! :hillbilly:

100_9173.jpg
 
Just get yourself two short sections of 2" square steel tube and make your own drop brackets for the front sway bar.

$5.00 and you're good to go! :hillbilly:



i run a fab shop. all teh free steel i can use:flipoff2:
if i do that, it'll be a chunk-o-stainless:hillbilly:
 
Is there a quick release setup for the sway bars on the 80?

For the front end you can use two hitch pins, lynch pins, or spring pins. I use spring pins, and they can be a pain in the butt at times, but they work great. After you pull the pins I either tie the sway bar up and out of the way using wire or remove it entirely depending on the terrain.

I don't disconnet the rear sway ever.
 
i run a fab shop. all teh free steel i can use:flipoff2:
if i do that, it'll be a chunk-o-stainless:hillbilly:

My PS pump leak keeps mine from rusting :hillbilly:
 
I put 850's/863's on my '92. Then when I took my sway bars off I wondered why I didn't do it sooner. No bad handling in my opinion. On my '93 I put in the 50mm spacers first. It rode like stock still. Then I pulled the sway bars and I didn't like it at all with the stock springs. I was considering putting them back in, but after putting the 850/863's on w/ L shocks I am very pleased with the stability. So I'm not putting mine back on. It's just one more thing to break, so it is not worth it to me, when the stiffer springs compensate for the lack of sway bar. I do run pretty light though. No huge toolboxes, racks, winch, etc. Just bumpers & sliders.
 
I strongly recommend having the swaybars in place for any vehicle other than one that is trailered to the trails and used exclusively offroad. Until you've done emergency evasive maneuvers that happen every day in street driving, you will not understand what they do for safe handling. Operating a lifted vehicle WITHOUT swaybars is simply negligent to other citizens on the public roadway. Call your insurance company (who is liable for the decisions you make) and ask them if this is fine with them to operate your vehicle in that condition. You'll also find that this modification removing safety equipment may allow your insurance company to wash their hands of any damage you incur by rolling the vehicle. Don't do it. And no, stiffer springs do not duplicate anti sway bars. Pure urban legend.

DougM
 
Back
Top Bottom