Steering arm washers

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 27, 2004
Threads
31
Messages
148
Location
Bay Area, CA
On my donor knuckles, the washers I found between the knuckle nuts and the cone washers on the steering arm were a mixed bag - some flat washers and some split lock washers (though they were flattened). Anyone know offhand what was stock- flat or split? Were they same on top (Steering arm) and bottom (knuckle bottom cap/lower trunnion bearing holder)?
Does it even matter?
 
Split washers on the small pattern knuckles, flat washers on the large pattern. On the top arm. There's something different about the bottom retainer. *Maybe* no wahers on the large pattern (still split on the early). IIRC right now.

Mark...
 
Naw. Lockwashers on all is a good idea.

Mark...
 
Yeah, that's it. I knew that there was a difference on the bottom, but it was escaping me.


Mark...
 
so what's this about large and small pattern? Never heard of that before...my '77 had both cones and splits both top and bottom.
 
subzali said:
so what's this about large and small pattern? Never heard of that before...my '77 had both cones and splits both top and bottom.
on the illustrious changing 79 models and mini trucks, they went to a knuckle that had a longer stud pattern than you style knuckles. stronger that way.
 
Back
Top Bottom