starter doesn't disengage

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 17, 2005
Threads
144
Messages
2,611
Location
Big Orange Country, TN
Starter continues to spin even after ignition key is turned off.

Anyone else experience this problem?
 
Its the first step in burning up.....time to put new contacts in ASAP!
 
Starter continues to spin even after ignition key is turned off.

Anyone else experience this problem?

Most often it's the starter contacts sticking, need to be replaced. Don't run the motor/drive with it stuck, if the starter comes apart it can cause a direct to battery short, possibly causing a fire. When it sticks remove a battery cable stop it,,, quickly, ASAP. The best plan is to not run the motor until the contacts are replaced.
 
Look for "starter contacts" in the maintenance section of the faq. You should find all the info you need to get it back in shape. I also recommend caution, if the starter contacts stick when starting the rig, you had better remove a battery cable quick, so you don't create a fire situation.
 
Luckily it was in my driveway so I was able to disconnect the battery very quickly or it could been much worse.

Was hoping it could be done with just contacts, just wish I would have done it as PM.

Learn something new every.

As always, appreciate all of the help.
 
Back
Top Bottom