Squishy Freakin Brakes

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Elevating the axle being bled will also help the trapped air make its way to the bleeder.
I remember reading a thread where the lspv sensing line was eliminated and the open ports plugged with some bleeders. This was reported to have firmed up the brakes. It seems like this may also adversely affect abs.
I'm disappointed in my brakes ,as well, ever since installing extended lines more than a year ago.
So far, in this thread, I have read to not use bleeder tools and just keep pumping away and I have also read that one must use a bleeding tool, preferably vacuum. So which is it? :confused:

It depends on if you want to stop or not:grinpimp:
 
When you say you "decided to replace everything", does everything include the master cylinder? If no, I would try all the tricks listed above, and if it doesn't take care of it, I'd replace the master. If yes, I would try all the tricks listed above, and if it doesn't take care of it, I'd replace the master.
 
So I started to repair the brake system when I got the wagon.
Went through everything. Soft brake lines, pads rotors, delete lsvp, abs, and much bleeding. Including a friends using an expensive bleeding machine.
It all needed done but in the end it needed a new master to make it all right. May be worth pulling it out to check it. Embarrassed a little bit about it being a bad master as I have done plenty of brake jobs. But I got hung up about the difficult bleeding I have read about and just kept banging away at the bleeding.
I think everyone's advice is all good. But for the trouble shooting you must keep an open mind about each and every component.
 
Good points. I didn't replace the master, nor have I let the fluid level drop too far while bleeding it. So with that in mind, I think I will attack one variable at a time. I'll give it another bleed, probably with a Motive Power Bleeder and if it's still a mushy mess I'll do the master. I'll let you guys know what works and what doesn't.
 
Back
Top Bottom