Split CV boots for an 80

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

It all depends on the way you use it and the circumstances. If someone runs basically on dry surface, then it's great. If someone tends to sink the truck and the seal holds, then it's also good. But if someone sinks the truck and it happens that water gets in somehow, then you fill the boots with water and instead of having a dry housing 10 minutes after your ride, you can drive with water inside for weeks. Not a happy ending.

Would I buy them? Definitely I would, but I would also make sure to make a tiny hole in the bottom.

Do you know the price? I am really a bit interested in those.
 
Do you have problems with the felt/rubber wiper? I've never seen an issue with it, short of if the inner axle seal leaks. I don't see the point here. If there's oil coming through the felt/rubber wiper, there's something wrong that you need to address other than the felt/rubber.

-Spike
 
I really think those are intended for mining trucks and others that see a lot of abuse in a dusty and abrasive environment. IMO those won't protect the inner axle seals.
 
I think their website says just that; protect from extreme dust, dirt, water,etc from the outside getting in, not from grease or oil coming out.

I agree that if you did go through deep water and they leaked, you would end up possibly increasing the chance for water to get into the knuckle.
The hole is a thought; or better, some sort of ?rubber drain plug, like on your kids slurpie cup. Open it to check for leaks, check for water, then pop it shut

No idea of the cost, sent an email to the company, no reply yet. Asked also if anyone in the US carries their products.

g
 
To MikePL;
they have an email link on their website; drop them a line; maybe you could
be their eastern european distributor!
 
I like that boot, seems to be a well thought out design. I wonder if the stock wiper is retainable under it for a double seal effect. But truely it seems the sole reason for the boot is to protect the area where the wipers ride, so that dirt and crap does not ruin that surface, making even new wipers uneffective.
 
Throw some of those on and no more need to ask the question "Does it look like I need to service the front axle" :)

.
boottrans.gif
withboot.webp
 
I like that boot, seems to be a well thought out design. I wonder if the stock wiper is retainable under it for a double seal effect. But truely it seems the sole reason for the boot is to protect the area where the wipers ride, so that dirt and crap does not ruin that surface, making even new wipers uneffective.

Good point about the wipers; the photos almost looks like
the stock wiper is not there; seems like it would be better
to keep that, and add the boot for increase protection.

Hopefully will hear back from the company soon.
g
 
Got it:

From Bloomberg News today:

"The Australian dollar fell to 92.44 U.S. cents at 10:59 a.m. in Sydney compared with 93.59 cents late in Asia yesterday. It earlier reached 94 cents, the strongest since March 1984. The currency also slumped 1.8 percent to 104.15 yen."

Would be nice if someone in the US carried these, and had them shipped by slow boat and ordered them in bulk; would guess the costs would be much lower.

Need MAF to stock these.

g
 
Does ENS Industrial in Canada have these possibly?
 
I see zero bling factor Nakman, unless they came in chrome or something I missed.

Part of me likes the idea. The other part worries that you might be tempted to let an axle issue 'go' because you wouldn't catch it soon enough.
 
Back
Top Bottom