Spindle nut socket depth?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 4, 2017
Threads
3
Messages
12
Location
Utah
My search for a 50mm spindle nut socket from my 73 FJ40 has proven to be difficult. I took a chance with a 50mm socket for a Suzuki Samurai but it wasn't deep enough. But my girlfriends dad has offered to cut it and weld in a length of pipe to extend the socket to the right depth. My question is can anyone measure the depth of their SST for me?
 
Some of the 'Mud vendors carry the correct socket. I believe Cruiser Outfitters has them.
 
I have a 50 mm socket from SOR that is stamped out of 2 1/8" OD tubing. (About 1/16" wall thickness) . The hex stamping is one inch deep, the "socket is 5 1/2" overall length. There is a 3 / 8" hold centered 1" from the round end to stick a tool through as a tee handle. I will post pics later, but that should work for now.
 
Some of the 'Mud vendors carry the correct socket. I believe Cruiser Outfitters has them.

Yup :D

Apparently we need to get them on the website but we stock them for the drum axles.

But we took a photo of them for the new site :D

IMG_3643.webp

Part# TOOL50SOCK
 
Back
Top Bottom