SPC UCA Replacement Bushings

[wthomp10]

My SPC upper control arms are squeaking like crazy. SPC said the replacement bushings part #25030 will fix the squeaking. Has anyone used these replacements?

https://www.summitracing.com/parts/sps-25030?srsltid=AYCX9vIyKxv_i6wDZTXdg0u8RW-7NaJdK6qnmn7hqN5iZONVNZeNtthf

 

[Trapper50cal]

X-Axis is what they come with, so it's also what they require. Mine are on the way out too.

 

[MongooseGA]

I've installed the replacements in my truck. They're fine. Keep the tool on hand for the next time, just in case.

 

[wthomp10]

So it's basically just replacing what's already there and will probably squeak again in a few years

 

[MongooseGA]

I haven't had any squeaking out of mine. The ball joints on the other hand..

 

[Trapper50cal]

So it's basically just replacing what's already there and will probably squeak again in a few years

Yup although I'll add, mine don't squeak either, just developed some play.

 

[wthomp10]

My ball joints are the new style replaced about 2 years ago and greased frequently

 

[Trapper50cal]

My ball joints are the new style replaced about 2 years ago and greased frequently

Ditto, but a little more recent. Just like the ball joint assemblies, it could be the case that they improved the bushings...
I haven't heard anything but it's possible.