Something strange happened today...

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 5, 2015
Threads
15
Messages
879
Location
Colorado Springs
Headed out to Pacific City today on highway 6 and everything was working normal.
Then, with no warning:
AC quit
Gauges quit (speedo, odometer, tach, temp & pressure)
Windows quit
Overdrive quit
Weird melted plastic smell

Engine runs fine. Starts fine. Lights work.
What gives?

1997 1fz

Pictures of stuff
image.webp

image.webp
 
Something very similar happened to me a long time ago, was in a 91 3fe though. Ended up being fuse able link wires got cut on the battery box.
 
That's what I thought but I would think the engine wouldn't turnover or stay running.
Fusible links look okay. But I didn't really pull stuff open
 
Did your A/C compressor seize, which then blew your gauge fuse? Had that happen to me just outside Guatemala city.
 
Which fuse is the Gauge fuse?
 
Inside panel, this is from my '94 FSM.

Screen Shot 2016-09-16 at 22.43.34.webp
 
Yeah. Blew the fuse right away after I replaced it. Idle kinda funny now too.
 
Others may have more ideas for what could be blowing that fuse, there are quite a few things on that fuse for some reason. You'd likely know if the A/C compressor was seized as the belt would be squealing and smoking like crazy. If it does end up being compressor-related: I had to have the compressor rebuilt with a new head, coil and bearing.
 
When it blew did it do it after you started the vehicle? Or did it do it as soon as you put the new fuse in and turned the key to the ACC possition?
 
Which fuse did you use? Was it British?

IMG_2026.webp


In all seriousness (believe it or not, I am capable of that), this happened to a buddy of mine recently and I believe it was because he screwed up the nose cone on the AC compressor. There was no warning, like others have suggested.
 
@Mudder I am not sure when it actually tripped again. I turned the key quickly and cranked it. I'd have to say the gauges were only on 2 or 3 seconds.
 
Which fuse did you use? Was it British?

View attachment 1322735

In all seriousness (believe it or not, I am capable of that), this happened to a buddy of mine recently and I believe it was because he screwed up the nose cone on the AC compressor. There was no warning, like others have suggested.

I did recently tighten the compressor tensioner because the belt was squealing. When I looked to replace the belt the tensioner was almost all the way in - so the belt was as loose as it could be.
 
The blue wire of the fusible link looks weak right there where it's bent 90*. All the belts still on?
 
I did recently tighten the compressor tensioner because the belt was squealing. When I looked to replace the belt the tensioner was almost all the way in - so the belt was as loose as it could be.

When the compressor was kicking on, did you happen to notice if the pulley was moving around with slack instead of being tight?

My guess is the compressor had something let go like my buddy's did.
 
All the belts are on. There was a pretty bad smell when this all happened.
I've never seen a "new" fusible link so I'm not aware of the 90 degree bend being weak.
Big thing to note is at idle it is noticeably weak and sounds like it is struggling.
My original plan was to go wheelin in the dunes then head back to Portland in Sunday. At this rate I'm worried if I'll make it back to Portland at all. Is there something urgent I need to be worried about?
 
Take the AC belt off and change the fuse again. If it doesn't blow you have a pretty good idea it's compressor related.
 
Why would he check the fusible links if the truck starts and runs?
I was just saying it looks like it's on it's way out by being kinked like that for God knows how long. Just something he needs to mind.
 
Back
Top Bottom