Sniper Pump Options

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Skreddy

SILVER Star
Joined
Feb 3, 2020
Threads
91
Messages
3,227
Location
Spokane, WA
For those that have done the Sniper on an F or 2F; thoughts on in tank vs inline pump? Looking at the Walbro (GSL392?) for inline or a universal in tank pump like the one from Tanks Inc I’ve seen used. I’ve reached out to a few on here for their feedback and maybe I’m just overthinking this, but I’ve got to do something until I actually hit “buy”.
My biggest concerns with inline are noise and running hot. Biggest upsides are ease of install and replacement if failure.
Biggest concern with in tank is noise potential as well, but not as much as with inline? Install is more involved but frame rail is cleaner and fuel in the tank should help cool the pump. Also provides a return port so no additional tank mod needed.
It’s a 1970 with no return line so I’ll be modifying the tank for a return regardless. Bench seat front so no clearance issues. Aluminum or Ni-Copp hardlines (feed and full return from sniper) will be used the whole way except short soft line connections between frame and engine/body.
I was looking into the Powersurge but I don’t feel my stock fuel pump is in great shape anyway so doesn’t make sense to buy a new pump to go PS.
 
I have only installed one Sniper. But. I have plumbed it numerous ways using a variety of components in various locations. My biggest dislike is a setup with fuel getting warmed up in the engine bay and getting returned to the tank. At first, I had "everything" in the engine bay and my tank would get hot to the touch as well as the pump and cavitation would begin after an hour or more crawling through the swamp.

I now moved everything: pre & post filters, pump, and regulator back close to the tank and only a single line enters the engine bay and to the Sniper. I hear the pump before start but not at all when running and my tank stays cool. I’m running the Walbro GSL 394, Aeromotive 12345 post filter, and the Aeromotive 13109 regulator. I’m happy with this setup.
 
The in line can be noisy, pre filter helps, and gravity prime location helps ALOT. Ease of replacement was why we went that way and its kinda nice hearing it whine a bit, you know its working. I T'd the return in to the vent line on the filler neck. Has rear tank as well, used a Ford dual tank switch valve that switches the return also.
 
I haven't installed my sniper yet but did order a intank pump after talking with Redline and Mosley.

I chose to go with a intank pump for better longevity, reliability and less noise. The downside, I guess for some, is the additional time it takes to install the intank pump. One vendor even told me if I decided to run an inline pump to make sure I purchased an additional pump to keep in the glove box with tools to change it out in case it went out while on the road.

I ended up purchasing an intank pump from Mosley. I'm pretty sure it is the same setup from Tanks Inc that folks are buying but they sell it with a Denso instead of the Walbro. The Denso pump is known to offer a quieter pump and is more reliable. Plus you get to support a LC company.
 
I have a sniper with an inline pump and return line. It has vaporlocked on me once on a long trip in the heat. The tank builds pressure if I leave the cap tight. Are you saying that you run it without a return line. I have been trying to determine what the best option is for reducing tank pressure.
 
I haven't installed my sniper yet but did order a intank pump after talking with Redline and Mosley.

I chose to go with a intank pump for better longevity, reliability and less noise. The downside, I guess for some, is the additional time it takes to install the intank pump. One vendor even told me if I decided to run an inline pump to make sure I purchased an additional pump to keep in the glove box with tools to change it out in case it went out while on the road.

I ended up purchasing an intank pump from Mosley. I'm pretty sure it is the same setup from Tanks Inc that folks are buying but they sell it with a Denso instead of the Walbro. The Denso pump is known to offer a quieter pump and is more reliable. Plus you get to support a LC company.
I will give redline a call. In tank was the route I was leaning toward since I started looking into this. Figure if most cars from the factory are in tank, there’s probably a reason. Now to pick a sniper color….
 
I have a sniper with an inline pump and return line. It has vaporlocked on me once on a long trip in the heat. The tank builds pressure if I leave the cap tight. Are you saying that you run it without a return line. I have been trying to determine what the best option is for reducing tank pressure.



You can plug the return at the sniper but need to install a pressure regulator with a return.

The Tanks Inc kit is pretty nice and with a little planning the install is straightforward.

23C06967-1323-4595-9812-BA8200B9B564.jpeg


D79FDFAC-4D51-48C3-A0BB-A76F99944232.jpeg
 
You can plug the return at the sniper but need to install a pressure regulator with a return.

The Tanks Inc kit is pretty nice and with a little planning the install is straightforward.

View attachment 2934410

View attachment 2934411
That their rollover vent valve in the 1st pic? Do you have it plumbed to vent elsewhere or in the cab? Any fumes?
 
That their rollover vent valve in the 1st pic? Do you have it plumbed to vent elsewhere or in the cab? Any fumes?
Yes, I’m going to run it to just under the filler neck on the outside of the truck. Don’t have it filled up yet.
 
I'm late to the conversation, but here's some other choices:
1. See my ebay #255332190551 FiTech external pump, but you are right, it has no return line provision.
2. See my ebay #255332291795 Full kit, BUT I don't think it can be cut down short enough for a shallow stock Landcruiser tank.
3. And just for giggles, check out my ebay #2654625276608 for a FiTech/Sniper conversion air cleaner.
 
Happy with my Walbro 392 on the rail with a self-regulating post-filter...keeps a few lines out of the engine bay, and a simple install if you have a "newer" fuel tank with the existing return line from the carb.

You can hear it at key-on before start, but the burble of fuel cycling back to the tank is louder than the pump, and you hear neither of them once the ol' 2F is fired up.
 
I think I’ve decided to go in tank. Ordered the sniper and a bunch of other parts. Will try to remember to update this thread when finished so future searchers may find it.
 
Back
Top Bottom