Sm420 Pto ?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 13, 2003
Threads
33
Messages
156
I currently have 73 Cruiser with a 3-speed and a Ramsey PTO. I have found an SM420 with a Chelsea PTO on the drivers side.

I'm wanting to install the 420 and use the PTO that is present on the transmission.

Here's the issue: The PTO is facing rearwards and not towards the front. Can I just rotate it around to a front drive?

Also, if it is hooked to the transmission, how will it operate?

Thanks for your help as always, ROB
 
I havent dealt with the PTO myself, but knowing how the hears are cut in there, I am doubtful you can spin the PTO around. I would take the topcover off though and take a look.
The PTO had a seperate stick to engage it if I remember correctly. You could probably build something if you need to.

Sounds like a cool toy. You could always use it to run a rearward PTO winch- though they are pretty darn big so I am not sure of an ideal location to mount it.

-Dustin
 
Cool.

So, tranny in neutral, PTO in, let out clutch and winch, right?

If you're wondering why I don't know this, I have not used the PTO winch that is on there as it has a missing shear pin and I have not messed with it.

Thanks for your help, ROB
 
ToyotaJeep said:
So, tranny in neutral, PTO in, let out clutch and winch, right?


Correct, the tranny mounted PTO is driven off the input shaft of the tranny. The transmission can be either in neutral or any gear and still drive the PTO.

Same as a FJ25, 'cept we don't have a two speed with neutral transfer case. ;)
 
I have to get the numbers off of it and see.

I aprreciate all of your help, ROB
 
Back
Top Bottom