Slee sliders - definitely worth it

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 27, 2003
Threads
312
Messages
12,155
Location
Salt Lake City
I recently purchased a set of Slee step sliders for the 100 and am very impressed with the quality. I built a set for the 80 series I had. At the time I couldn't justify dropping $800 on Slee's sliders for it and figured I could surely build some for much cheaper.

Well, that's not necessarily the case. I used George Scolaro's excellent design, had the pieces cut at a shop, purchased the main slider 2x3 stock, had step rails bent, welded them up myself, and then had them powdercoated. When it was all said and done I was into them about $600 ($300 for materials and cutting, $200 for PC, $50 for bends, $50 for ubolts) and that doesn't include all my time welding, finishing work, and chasing stuff around. I can tell you my pride in "I made these" diminished quickly.

The Slee sliders are very well made, bolt right up, include everything you need, and have a great finish. Pics to come soon, abuse to come later.
 
I recently purchased a set of Slee step sliders for the 100 and am very impressed with the quality. I built a set for the 80 series I had. At the time I couldn't justify dropping $800 on Slee's sliders for it and figured I could surely build some for much cheaper.

Well, that's not necessarily the case. I used George Scolaro's excellent design, had the pieces cut at a shop, purchased the main slider 2x3 stock, had step rails bent, welded them up myself, and then had them powdercoated. When it was all said and done I was into them about $600 ($300 for materials and cutting, $200 for PC, $50 for bends, $50 for ubolts) and that doesn't include all my time welding, finishing work, and chasing stuff around. I can tell you my pride in "I made these" diminished quickly.

The Slee sliders are very well made, bolt right up, include everything you need, and have a great finish. Pics to come soon, abuse to come later.


I continue to be amazed at how anyone makes any real dough making/selling sliders. I wanted some different features than what was offered...but like you ended up just north of $600 not counting flapper disks, welding gas, welding wire, electricity, etc. I could understand it if they were making hundreds or certainly thousands but the 100 market is pretty damn small for any quantity break at the manufacturing level.
 
Yep, I agree. Slee sliders rule.
 
I continue to be amazed at how anyone makes any real dough making/selling sliders. I wanted some different features than what was offered...but like you ended up just north of $600 not counting flapper disks, welding gas, welding wire, electricity, etc. I could understand it if they were making hundreds or certainly thousands but the 100 market is pretty damn small for any quantity break at the manufacturing level.

This is what they call a "Loss leader" in business. It doesn't make em any real money, but it gets you to buy other things from them. Since the quality is good, people recommend them, and then people end up buying other stuff from the same company. Reputation ya know.
 
good to know, its on my list...really. im just cought up in foo foo silly other mods right now. I'll probably change my mind saturday night when my running boards are bent to all hell.
 
Slee step sliders rock! I still can't decide if it's good or bad to live 30 minutes from Christo's shop? It's kinda like a crack habit! :D
 
Slee step sliders rock! I still can't decide if it's good or bad to live 30 minutes from Christo's shop? It's kinda like a crack habit! :D


At least you don't have to pay shipping on all that crack :D
 
well, economies of mass production aside, sliders, bumpers etc have a particularly steep learning curve I think since the fitment is so critical. And sliders in particular can have some odd geometry to them, so it takes an inordinate amount of time to figure out the first one, I guess, but then reproducing it later on becomes much easier and much cheaper, relatively speaking.

I would bet that if you had all the equipment and knowledge, you'd still end up spending as much time measuring and figuring out shapes etc the first time around than in actually fabricating the thing together later on.

So making just one of them from scratch will indeed probably not result in large savings if your time is valuable. I think this has been mentioned a number of times here by people who tried. Retail prices of materials probably hurt big time there.

I bought mine...
 
well, economies of mass production aside, sliders, bumpers etc have a particularly steep learning curve I think since the fitment is so critical. And sliders in particular can have some odd geometry to them, so it takes an inordinate amount of time to figure out the first one, I guess, but then reproducing it later on becomes much easier and much cheaper, relatively speaking.

I would bet that if you had all the equipment and knowledge, you'd still end up spending as much time measuring and figuring out shapes etc the first time around than in actually fabricating the thing together later on.

So making just one of them from scratch will indeed probably not result in large savings if your time is valuable. I think this has been mentioned a number of times here by people who tried. Retail prices of materials probably hurt big time there.

I bought mine...


And the discounts on steel, again unless you are buying enough steel to make hundreds if not thousands of units, are not that aggressive. Definitely a labor of love. FYI: I have made 2-sets of sliders...and I figure I might hit the bullseye regarding perfect design for me on the 3rd set :rolleyes: (if I'm lucky ;)).
 
I really like the looks of the ARB step sliders. As well, the bull bar / slider integration piece across the front fenders that give more structural support to the front end.

I know, total Hijack! :D
 
I really like the looks of the ARB step sliders. As well, the bull bar / slider integration piece across the front fenders that give more structural support to the front end.

Yeah, not so much a slider.
rubi.webp
 
I really like the looks of the ARB step sliders. As well, the bull bar / slider integration piece across the front fenders that give more structural support to the front end.

I know, total Hijack! :D

Why don't you give it a try and lets us know how it works out! :grinpimp:
 
well, economies of mass production aside, sliders, bumpers etc have a particularly steep learning curve I think since the fitment is so critical. And sliders in particular can have some odd geometry to them, so it takes an inordinate amount of time to figure out the first one, I guess, but then reproducing it later on becomes much easier and much cheaper, relatively speaking.

You only have to make the mold once, after that it becomes build and quality control. Then factor in things like human error and 3rd party vendors, it begins to get interesting.
 
That really sucks about the ARB units!
 
I just sent ARB an email about those steps. Told them to ask the Australians why they can't make a step slider like the Slees that won't bend. I also included that picture and told them that it was a disgrace to the ARB name :)
 
I just sent ARB an email about those steps. Told them to ask the Australians why they can't make a step slider like the Slees that won't bend. I also included that picture and told them that it was a disgrace to the ARB name :)

Just buy Slee's and be happy! I hope you didn't piss of ARB, I may need some of their stuff down the road!
 
Back
Top Bottom