Side marker aid

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 19, 2019
Threads
1
Messages
3
Location
Southern California
Hi y'all,
I am currently in the process of attempting to get my 72' insured in California. To do so, I have to pass a safety test, in which the mechanic stated that my ambers need to be lit while the headlights are on. I am using the Land Cruiser Painless harness and had scraps of the stock harness when I got the 40. They currently only flash with the turn signal and hazards when wired following the 72/73 wiring diagram. Are they supposed to stay on and flash when the headlights are on?
 
My '70 is all apart right now but I don't think the side markers blink with turn signals. Do your turn signals light up with the headlights or only when flashing?
 
The side marker lights, both amber and red, should light up when the headlight switch is pulled out to the first "click". They stay lit when the headlight switch is pulled out all the way. This is the same circuit as the low wattage filament in the turn signal lamps, NOT the directional/stop filament.

Note that the directional/stop light fixtures have two filaments in each bulb, low wattage filament for the running light, high wattage filament for the directional/stop light.

Just splice into the wire feeding the low wattage filament running to each of the four directional/stop lights.
 
Last edited:
The side marker lights, both amber and red, should light up when the headlight switch is pulled out to the first "click". They stay lit when the headlight switch is pulled out all the way. This is the same circuit as the low wattage filament in the turn signal lamps, NOT the directional/stop filament.

Note that the directional/stop light fixtures have two filaments in each bulb, low wattage filament for the running light, high wattage filament for the directional/stop light.

Just splice into the wire feeding the low wattage filament running to each of the four directional/stop lights.

Thanks for this help after I spliced and reran some wire they all work fine in both clicks of the switch!
 
Back
Top Bottom