Shift Knob?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Nomis said:
2 Questions:

(1) Do these sizes sound correct for a '76? Trans knob: M10x1.25 T-Case: M8x1.25


Yes.


Nomis said:
Anyone know of any places to buy metal knobs (aluminum, stainless, etc) with the factory shift pattern?


Not off hand....but google it, and look on ebay. Someone has to have something....


Good luck!


-Steve
 
Also put a post in the "Parts Wanted" area of this board. Someone probably has one for sale.
 
I had a wooden knob on my truck, with no shift plate, I had a peice of lamicoid plastic engraved and cut at an engraving shop, made the file myself, had a friend burn it, looks reasonably good, cost to have it burned was 4 bucks for two (same price they use for pet nametags) If you find an aftermarket knob that will work, I could send you the file if you want to get one burned.
it can be scaled to whatever size you need, and the color will actually be the color of the lamicoid you choose, I used white outer/black inner(inner=writing)

here it is converted to a jpeg:
shifty.webp
 
dustin said:
longfield shift knobs are BLING BLING. I just ordered a set this am for my twinstick project. :smokin:

-Dustin



The word "BLING BLING" died along time ago...

:D


I had a local machine shop make me one also
 
Alright, I found a place that sells shift knobs that are FJ40 specific. They are anodized aluminum and are of the correct thread size - no adapters. Not sure if I will pick some of these up or not - the thought of grasping an aluminum knob in the middle of summer or dead of winter with bare hands does not sound too appealing. I may just buy a stock plastic knob from Toyota. Here's the link - I found it in Petersen's 4Wheel mag:

http://www.litegrip.com/transmission.php
 
I got a bunch of different wood and leather OEM Toyota knobs off ebay...

Some are from old Celicas and Supras tho...so some did need to be redrilled...

But I like the "old school" Toyota logos for bling...Especially th TEQ logo..

Do a search for "ASCO knobs" on ebay...

heres a couple of them in my Taco.
http://www.frontiernet.net/~toyfvr/Tacoma Stuff/tacocigpwr.jpg
 
Here's Mine

I dont' have a picture of it so I posted the cad drawing of it....

It's a one of a kind :flipoff2:

On a SM420, It's Al and I've been in 100+ degrees and 30- and it doens't get that cold or hot.. if it's cold once you start driving it warms up. tuff it out!
 
Last edited:
Back
Top Bottom