Sharing some good news

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 28, 2017
Threads
12
Messages
40
Location
New Hampshire
My rear liftgate struts were out, and everywhere I looked for parts it was going to be $100 for new ones. I found these pictures on eBay for $18.99 and took the risk. I They fit and function Perfectly. Recommend.

IMG_2194.webp


IMG_2193.webp
 
I have the same ones. Even if they do s*** the bed, I could buy five sets of them before I spend as much as one set of OEM ones. This is a perfect example where an OEM part just doesn't make sense in my opinion.
 
I switched to the McMaster Carr version in order to stop whacking my head on the gate. Even with new stock version ones, it wouldn't lift it high enough for me.
 
I switched to the McMaster Carr version in order to stop whacking my head on the gate. Even with new stock version ones, it wouldn't lift it high enough for me.

What is this magic you speak of? do you have a part number?
 
What is this magic you speak of? do you have a part number?

Cylinders: 4138T579 (Same as 4138T57) (Gas Spring 19.72" Extended Lg., 90 lbs. Extension Force with Ball Stud Ends) (Qty 2) ($17.51 ea.)
Nuts: 90257A045 (Super-Corrosion-Resistant 316 SS Hex Nut 5/16"-18 Thread Size, 9/16" Width, 7/32" Height) (Qty 1 pack of 10) ($4.22/Pk)

There is a little drilling and MINOR fabrication involved, but it raises the tip of the upper gate about 10". The wind deflector on the top ALMOST hits the roof when it is up. However, it holds it up in -21°F weather. (Tested)

My wife has a hard time reaching it now, but both my son and I have no problem grabbing it. (6'-2" and 6'-1") But neither hit our head on it anymore.

Do a search on the 80 section for "McMaster Carr" and you will find the original thread write-up.
 
Definitely one very important fix. Nice job.

When I got my 80 it had the limp hatch. I quickly got sick of supporting the hatch with the back of my head while loading/unloading stuff.

I did the :hillbilly: mod for a while, using a broken hockey stick for support.

Got my struts off Amazon for ~$20. On their second year and still work great.....hold the hatch up nice and high too.
 
I need some of these for the 100. I nearly split my head open the other day.

I suppose a search is in order to get the specs.
 
I switched to the McMaster Carr version in order to stop whacking my head on the gate. Even with new stock version ones, it wouldn't lift it high enough for me.

Proper lift and tires solve that problem!:hillbilly:
 
Back
Top Bottom