Saginaw ps conversion

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jul 27, 2005
Threads
286
Messages
1,214
Location
Sedro Woolley, Wa.
Help. Doing saginaw ps conversion on a 75 and 78 FJ40. The h--p grand cherokee has a good drop for a 2 1/2" front lift and fits the Sag but lost the address from where I purchased the last one.

Any suggestions?

Good inputs on the pulley post. Thanks Bill

1970 FJ40 still frame off
1978 FJ40 still frame off
1975 FJ40 almost there- wii have ARB lockers fr and rear and the moon. Not for sale
1978 FJ45 coming from the NW in 8 days
85 FJ60 350sbc 700R4 bitchin truck
 
Or from Mark's Off Road!

122-11B P/S PITMAN ARM, DROP TYPE $69.00.

Contact info below:

!
!
!
!
V
 
I picked up one brand new for something like 35 bucks. I dont remember right now but I do have it written down somewhere. It may have to wait until monday. The stuff may be at work.
 
Of the Jeep pitman arms I've seen - they're either indexed incorrectly or they're too short.

Look for something with about 6.75" to 7" from centre to centre, and unless you're sprung under, go with a straight arm from something like an early Camaro or Nova.


~John
 
Last edited:
Of the Jeep pitman arms I've seen - they're either indexed incorrectly of they're too short.

Look for something with about 6.75" to 7" from centre to centre, and unless you're sprung under, go with a straight arm from something like an early Camaro or Nova.


~John

Absolutely correct. Wrong index and too short.

78 Bronco. correct index, nice and long and very beefy. Available from JC Whitney. Not available from most parts stores as they often don't carry parts that don't wear out.

https://forum.ih8mud.com/showpost.php?p=795292&postcount=9
 
Last edited:
I was thinking of the scout box conversion, my bad. I guess the pitman I have wont work with the setup you are going with. Its the one on the inside of the frame rail right behind the bumper right. I just have pigs on my mind.:cheers:
 
sag ps

Thanks for the help. In the past I ordered from a heep parts mag but don't remember the name. Before I moved from western Ky. My neighbor on an adjacent farm had about 2 acres of old chevy muscle cars and the 4 bolt ps boxes had the same number ending in 1676
he would sell the box and pump for $50. Most of the pitman arms were straight but some had a pretty good drop. One set I bought was from one of the earlest trucks to offer power steering and it had the wide belt pulley on the pump. Bill
 
Back
Top Bottom