Rust question from a newbie

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 16, 2018
Threads
65
Messages
529
Location
SoCal
First of all - thanks for the help on the interior retrimming question yesterday, super helpful info.

I've been looking at a lot of for sale listings and trying to educate myself on what I am seeing.

I do my own mechanical work and can weld, so projects don't scare me but I am aware buying someone else's work and labor at a discount is usually a better way to go.

I came across one FJ with rust as pictured. I haven't developed the ability to see behind the exterior metal on these yet so was hoping to get some coaching on how nasty this repair would be.

My guess is that this area rusts from below or the inside out? Is it correct that I should expect a lot more rust when I open this area up?

Thanks again - the collective experience here is amazing, thanks for sharing some of that.
 
Rust repair is pretty intuitive . Treat what you can with chemical repair , cut and replace the rest.
That said , it's funny how in some circles this adds value...
gnarly-looking-rusty-rat-rod-at-@gatebil_official.-i-wonder-if-it-will-pass-tech-to-go-on-track-%F0%9F%A4%94.jpg

af8289f3080fd5eacce743825623d153.jpg
 
Where in SoCal are you located? Is the Landcruiser close?

Hi guys, thanks for the responses.
This one is not local to me, unfortunately I’m somewhat limited in the pictures I have of it. All the things you normally want to do, such as crawling underneath it etc. is not gonna happen right away because the seller is unavailable.

So on the two pictures I posted would it be “just “a matter of cutting back to good metal and then putting replacement metal in? Those look like fairly flat areas that don’t have any compound curves so not the most difficult welding to do.

I am in Orange County
 
So just to be clear you do not own this fj40? I'm just going to throw my .02 cents out there and say this is not a great "starter" in my opinion. there are plenty of things wrong with this much of which I'm sure I've missed and others can pick out better than I. But if you have the option of keep looking, then do that. If you've already made some deal with the seller than you have some work to do. The part you pointed to for rust looks like the least of the rust issues. I think yes it is ultimately probably as easy as you were describing, but the rear sill is another story, the windshield frame looks rusted and don't even get started on the fenders there appears to be much bondo there. There's plenty more but I won't go into that too much.

Especially if you can't get some in person time with it I'd avoid it. Keep looking. Don't hesitate to throw up some possible searches you find and ask for value or opinions on this site. There are a lot of guys with a lot of experience and have touched each and every bolt of their fj40 and can tell you exactly the work involved to make things right. So if you see something you might want another look at, don't be afraid to post it here. Also guys here are very helpful so even if you needed someone local to a vehicle you found to take a look at it doesn't hurt to ask. Often times they're willing to do it for a fellow Mudder.
Again just my .02 cents
 
That was worth a whole lot more than two cents, Thank you for the honest appraisal. I will readily admit to being newly captivated with these things and more focused on the potential rather than the current as-is.

I am definitely in the “fool and his money” stage.

Thanks!
 
I love how the radio is mounted.
I've seen far worse as the rust goes. 90% of that is patina that can be chemically treated primed and painted.
Most of that you could learn to do youself. Paying people for body work gets expensive. The body on that
could be fixed with beginner skills ,time and patience.
The rear sill is one of the easiest body pieces to replace. The hood ornament is in great shape. If you're thinking
full on resto, there's a lot to do but it would make a great cabin or weekend runner with less work .
It's probably not a 15,000 truck but in today's market it would probably bring five.....I'd try to get it for two
 
I mean the as-is is great if you're getting it for super cheap. In that case I say go for it and knock yourself out fixing it up. I guess my comments are more considered if you wanted to get the most bang for your buck then I'm just saying you could find better. But I get it, you've caught the bug and unfortunately for you, I don't know of any cure get rid of it.

Good luck with your search.
 
Perhaps the most sage observation ever - "you've caught the bug and unfortunately for you, I don't know of any cure get rid of it."

OK - so here is the rest of the deal. I can weld, kind of enjoy it. I am not overly concerned about cosmetics since it's going to get used and I've been down the path of making a car too nice to actually use (still regret that). I loath rust, so I'd want to preserve her and cut any rot out but then not be inclined to do much beyond making sure solid.

I turn my own wrenches, have rebuilt a couple (more than a couple actually) cars that I've then used on long distance touring events. This would be my first truck and thus my first FJ40. I like fixing things and I quite enjoy getting a sick (or dead) car back on the road. My track record is pretty good so far, no abandoned projects but some delayed ones. Grin.

After your help I'm comfortable that I can redo the interior myself sourcing from the suppliers you provided.

My goal is a truck I can use to run around town and light trail use out near Joshua Tree etc, maybe off-road touring eventually.

This specific Cruiser was converted to a 350 engine with a turbo 350 automatic. Hasn't run in some time, looks to my eyes like it did but then was put away dirty and left to sit. The immediately prior owner to the current passed away and it was bought at auction as-is. No key so the current hasn't tried to turn it over or get it started.

Yeah, I know, I know. One of us would have hot wired and run it in like the first 30 minutes but the seller hasn't bothered or doesn't want to know the actual condition. The good news is that you can shake a tree and have 350 bits and whole engines fall out, ditto with the transmission of course. My working assumption has to be that the engine and transmission are bad, maybe I'll get lucky. Probably not, yes, you are right. Let's assume the engine and transmission are both paperweights.

The top is gone, probably didn't float away since they are pretty heavy from what I understand, but gone in any case.

No rear jumper seats, basically what you see is what I'd be getting.

Not sure what super cheap is on these nowadays, under $5,000? Under $4,000?

Thoughts? Warnings? Red flags?

Thanks!
 
Yeah - so - I just noticed that the gearshift level and third pedal kind of suggest this doesn't have a 350 turbo automatic in it.
 
Back
Top Bottom