Running Board Removal

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jun 15, 2006
Threads
19
Messages
310
Location
Austin, TX
finally, after owning the rig for two months i took off the running boards. i had wanted to do it for some time. i was walking to my baby after leaving work, she was sitting alone, and was looking at her and finally decided to pull em off. what a difference!!! she looks great and now no more worries(well, one. i still need sliders), no big piece of plastic to crunch and bend. and she looks taller!!!


http://s52.photobucket.com/albums/g8/jordan9780/running board removal july 06/
 
Looks nice. On my buddy's, we saved the front plastic fender piece and trimmed it to match the body line. It clens up the rear of the fender flare.
 
gulp-

yep that's exactly what i'm going do. trim the front fender piece to match and then use the back piece trimmed to fit the sliders. but thanks for the advice.

just out of curiosity, what did you use to trim the plastice pieces with? (maybe a saw and a file)

does anyone want the running boards, they are free!!!!
 
I wish pulling my running boards was that easy. I tried two years ago to get them off. The salt used on the roads here in the winters has eaten away at the attachment bolts and made them some odd size that will not be easily grasped by a conventional socket. I think I'm going to have to cut them off.
 
doc-

do what you can to get them off!! you will love your rig without!!
 
80krazE said:
gulp-

yep that's exactly what i'm going do. trim the front fender piece to match and then use the back piece trimmed to fit the sliders. but thanks for the advice.

just out of curiosity, what did you use to trim the plastice pieces with? (maybe a saw and a file)

does anyone want the running boards, they are free!!!!

IIRC brand Dremmel makes a great little soldering pen with multiple tips I picked up at a hoppy shop for about $30. One of the tips is nothing more than an exacto knife blade. Put onto the soldering pen it cuts through the plastic pieces like a hot knive thru butter. I used it very successfully trimming my front flares around Hanna's sliders and the little plastic piece on the bottom of the rear door flare. It needed a little trimming as well.
 
80krazE said:
finally, after owning the rig for two months i took off the running boards. i had wanted to do it for some time. i was walking to my baby after leaving work, she was sitting alone, and was looking at her and finally decided to pull em off. what a difference!!! she looks great and now no more worries(well, one. i still need sliders), no big piece of plastic to crunch and bend. and she looks taller!!!


http://s52.photobucket.com/albums/g8/jordan9780/running board removal july 06/

Looks good man,
What lift/tire combo on that rig?
 
Looks good man,
What lift/tire combo on that rig?

socalfj-

simple and true-
lift- OME 2.5" heavy front, medium rear
tires- 285/75/16
 
running board end piece

Finally removed my running boards. Does anyone have close up pics of the trimmed end piece before I start cutting? Not sure where to start.
 
now pull of the center caps of the rims. I have the same color truck. Working on the same lift. Just need to finish taking off my boards now. Last time I tried I had a hard time getting a wrench on some of the bolts. Tight fit. The our trucks will be almost identical. I am looking at having some step sliders custom made.
 
gulp-

yep that's exactly what i'm going do. trim the front fender piece to match and then use the back piece trimmed to fit the sliders. but thanks for the advice.

just out of curiosity, what did you use to trim the plastice pieces with? (maybe a saw and a file)

does anyone want the running boards, they are free!!!!

Good set of tin snips worked great for me.
 
now pull of the center caps of the rims. I have the same color truck. Working on the same lift. Just need to finish taking off my boards now. Last time I tried I had a hard time getting a wrench on some of the bolts. Tight fit. The our trucks will be almost identical. I am looking at having some step sliders custom made.

My caps have been off for months and I love the look. I want to start cutting the end caps while I have some time today. Just scared I'm going to cut off too much. Besides which tools use, where do I cut the things? Need pics.

I had no trouble on the bolts, just had to slowly work on the rear upper bolt with an open ended 13mm wrench.
 
so about an hour ago i read this thread:idea:
an hour later and i'm now boardless:clap:
the upper most set in the rear is a real bummer.
center caps have been off for some time....how can you sleep at nite knowing you're just hiding a full floater under them?
 
trim

Had some freetime, so I took a couple pics of what I did with a cordless jigsaw...
DSC00114.jpg

DSC00113.jpg
 
DSC00115.jpg
 
Thanks Coguy. I started trimming yesterday--looks like I'm going back in to take off some more plastic!
 
Back
Top Bottom