Riddle me this!!!

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Aug 20, 2006
Threads
48
Messages
280
Location
Charlotte, NC
So I have been having different starter issues, I was planning on ordering parts today to try and sort it out. I got a couple of different ideas on things that I could fix it here. But we have a new issue that has got me confused. Went out this morning to start the LX when I did it started with a little hesitation. The a/t light came on the oil light came on and the starter continued to spin I could not get it to shut off. I ended up popping the hood and disconecting the cable. Now with the keys out of it if I hook the positive cable to the battery it tries to start. Where are the gremlins at in this the switch the starter where?
 
Starter contacts, as Tools mentioned, don't try to start it until repaired, if you leave the batt cables hooked up, and it continues to "start" you stand a good chance of a underhood fire.
 
Classic starter contact issue. Link below will help.
Starter Motor Contacts
Replace the parts mentioned in the starter contact rebuild in the FAQ.

Not bad repair at all...

Scary when it happens but totally fixable.
 
Last edited:
Sounds like your starter contacts are welded to the plunger. You might be able to to disconnect them by whacking the starter with a hammer. Until the contacts are unstuck the starter will continue to run with the battery connected. You definitely need new contacts. The plunger might also be a good part to replace since you're definitely getting some arcing. The hardest part will be removing the bolts that hold the starter to the block.
 
Starter rebuild is a 1 hour job and the contacter is cheap. Should solve all your problems!
 
Back
Top Bottom