Reverse Lighting Upgrade

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

SmokingRocks

hopelessly addicted to Cruisers
Joined
Oct 6, 2014
Threads
116
Messages
4,111
Location
Colorado
Ever since I backed into a black BMW 3 series in a gas station parking lot at night that pulled in behind me I've been meaning to improve the reverse lighting situation. I had a set of unused Phillips LED headlight 'bulbs' in my spares bin that were not suitable for headlight duty. My mind had been wondering how I could use them as reverse lights, tonight my hands took over, here's the process. Spoiler: I'm super happy with the outcome.

Driver Side done, Passenger Side standard bulb
IMG_1916.jpeg


Remove light, cut off the reverse light bulb holder
IMG_1917.jpeg

IMG_1918.jpeg


Remove the bulb holder and wires
IMG_1919.jpeg

IMG_1920.jpeg
 
Last edited:
Bore out the hole to match the size of the headlight unit
IMG_1921.webp

IMG_1922.webp


Insert bulb unit
IMG_1923.webp


Apply silicone or clear rtv to seal the bulb
IMG_1924.webp


Plug it in and solder the driver unit in
IMG_1925.webp
 
Back
Top Bottom