Reverse light on

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 2, 2009
Threads
59
Messages
207
Location
New Jersey
Hey all just hooked up my reverse light - they stay on when not in reverse and go off when in reverse.

Wrong switch?

Thanks

image-3045167151.webp


image-1195653718.webp
 
Yup looks like its the 4 speed switch in there in place of the 3 speed.

Rockauto has the both versions for around 45 bucks !
 
have you ohmed it out? Did you also change positions of the plunger and ohm it again to verify change of state? Could the switch be gunked up and stuck in the reverse position? maybe it could be ungunked? just a few questions;) I have found that unless it is totally frakentrucked, most things are simpl..er:mad: MORE simple than we might all expect at the onset...
 
My reverse lights stay on all the time...so I took the bulbs out. They used to work fine, but all of a sudden they messed up. Any clues?

Take the switch out and see if they are still on. Likely switch is "stuck" or enough crap in it to flow current. I'd hit it with contact cleaner (not brake cleaner)
 
Back
Top Bottom