Removing rubber bedliner material?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

xylene- available at home depot, probably most hardware stores. Cleaned up mess of roll on liner pretty well while still wet. Didnt do so well once the stuff dried though.
 
Xylene is the main ingrediant in the 3m woodgrain and stripe remover and works really well.
 
I would try some air tools, specifically an air chisel. I bought this air scraper kit on a whim and it has ended up saving me days of wire wheeling. I am using it to strip all of the undercoating the PO put on the underside of my FJ55 project. Amazing, it just eats through it nicely. Rips it up in sheets, great tool and cheap! Plus you can sharpen the blade with a few swings of a standard file to keep it sharp. I plan to use this to take off most of the big chunks and then use a wire wheel to get all the other leftovers up. Should work well too on the undercoating although the ucoating will probably be more rubbery and not as brittle as the stuff I am working on. I would stay away from solvents, that could get messy.

http://www.sjdiscounttools.com/ap1750k.html

Noah
sjdiscounttools_1923_69316.webp
 
Last edited:
Back
Top Bottom