Relay education?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 23, 2005
Threads
52
Messages
424
Location
Arroyo Grande, CA
Horrible picture, but Im about to hook up my aux pusher fan and I noticed all the relay socket/pigtails I have right now all have a very small gauge wire jumping the 85 and 86 pins!?!?

So it's basically jumping the ground and power activation, this wouldn't activate the relay. I don't see the point of this. I called the local electrical shop where I bought them and the guy there didn't know what it was for! Anyway, these are Magnadyne pt # ALA986S here's a link, (manuafactures site has this same info);

Magnadyne ALA986S

The relays are labeled as single pull double throw.

Anyone care to educate me on this? Is this cool to use?
Relay piggyback.webp
 
relay

use the pigtail dont worry about the diod. it will function just fine. the diod is just for votage spikes. that is what my install guys said..i have used relay pig tails with and without the diode for lights and to hook up compressors without problems..
 
The diode is there to suppress the AC spike caused by the coil of the relay. Just make sure that the positive wire going to the coil is on the same side of the diode as the silver band. Otherwise you will merely have diode popcorn:p
 
Back
Top Bottom