Red hot down pipe take 2

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 19, 2008
Threads
105
Messages
787
Location
Boone, nc
I posted up a while ago about having a red hot down pipe (inbetween the ex manifold and cat) when under a load. I thought it was the cat at first and replaced that with an aftermarket one. It still turns red when under a load. It turns red towards the top of the pipe (closer to the ex manifold). Does this mean i'm running lean? If so how would i fix this? isnt fuel mixture figured out by the computer?

Thanks for all the help.
 
Last edited:
Hello

It would help if you posted some basic details of your truck.

The oxygen sensors in the exhaust tell the computer how much fuel to meter in (other parameters used as well). If they are damaged or faulty it may cause the engine to run lean.

Good articles here - and a good write up on the function of the O2 sensor

AUTOMOTIVE TECHNICAL ARTICLES

sensor article

http://www.autoshop101.com/forms/h37.pdf
 
91 3fe. No other mods that would effect the engine. timing is stock. Original o2's. Are the o2's something that i could just get at advance or are they one of thse parts that people insist on getting oem?
 
Call CDan and pick up factory units, from my experience that is the best bet. You pay more but, you have the piece of mind that it is exactly what is meant to be there. IMHO.

Good Luck
 
Thanks alkaline will do. Is there anything other than a lean condition that could cause this? (red down pipe.)
 
Ah! that explains it. Little munchkins with torches. I thought i would have picked that up.

lol.
 
Back
Top Bottom