Recovery strap attached to frame?

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Mar 9, 2016
Threads
6
Messages
42
Location
Oakland, CA
On my first trip on a very rocky track I encountered a Jeep that was stuck. I discovered that I had no recovery points or tow hooks. I remembered from this site that the next best thing was to use the frame. I was able to wrap the recovery strap around the frame in the front on the right side. Putting into compound and without locking I was able to slowly pull him off.

There was some minor warping to my sheet metal but otherwise OK. Did I do the right thing? I can't find the thread that talked about using the frame. Does anyone have the link? The alternative was backing down a narrow rocky road on the side of a mountain for two miles and leaving him there.

Thanks.
 
Hey there, why not let this experience show you that you do need lagitimate tow points? Add those.
 
attaching to the frame is fine. in fact...your tow points, once you get them, would be bolted to the frame.
 
Use the factory recovery points. They tie right into the frame and are recommended when doing recovery.

Should be able to get some on here from people replacing their bumpers and are just sitting around.
 
Yes, thanks, I will be getting recovery points. I thought I had them. I had bought 13,000lb shackles and just assumed I had the points but, stupidly, didn't look despite spending a lot of time under the truck.
 
Just a heads up they use fine thread bolts. If your rig is rusty you might be buying a tap.
 
Thanks, didn't think about that.

We won't have access to our truck for several weeks. Can someone confirm the tap/bolt specs. M14-1.50? Center-to-center bolt hole distance? Bolt grade?
 
Back
Top Bottom