Rear Window Defroster

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 29, 2007
Threads
102
Messages
759
Location
S. Jersey - New Germany
I am sure I am not the only one to experience this. When I turn the rear window defroster on all I get is a thin line of working defroster. I've done a search coming up with very little help. I've seen a few suggestions without any return feedback. Has anyone had this problem and fixed it?
 
Some have bought the repair copper paint kit and fixed the breaks in a line. I looked mine over and can't find any breaks so mine still works like crap.
 
That's because you have a break in the conductor. You will need to trace down the break by looking at each line and look for a nick in the wire. You'll also need to check the contacts on the side of the glass where the wires are connected.

A quick search resulted in this thread that covers repairing the grid...
 
Thanks! That post is helpful.

Rod
 
Yup, but my old eyes could not see a nick or break. I'll look again in better weather (after I don't need it)
 
Good link wob

I'll give the voltmeter method a try
 
I'll give that a try too

Thanks!
 
Back
Top Bottom