Rear heater

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

musthave

All maps, one app!
Supporting Vendor
SILVER Star
Joined
Sep 4, 2013
Threads
729
Messages
5,910
Location
Florida / Colorado
I don't want to remove entirely due to time. Is it possible to remove the blower portion withou disturbing water lines?
 
If you wanted you could cut the soft lines where they run up through the floor under the front right seat then connect a short section of hose between the ends of the hard lines in a U-shape.

Easy to just remove one of the original hoses completely then cut the other hose close to the floor and bend it over the other pipe and reconnect. When removing the rubber hose attached to the pipe coming down from the heater core slice it lengthwise using a box cutter blade in a couple of spots then peel it off so you don't damage the pipe.

Then if you want to remove the rear heater assembly you'll have to remove the passenger seat; then just a few fasteners holding the assembly in place, disconnect the harness connector and it's out. You can seal the hole in the floor with about anything.
 
Last edited:
Back
Top Bottom