Real time help needed front spindle

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Nov 5, 2004
Threads
529
Messages
9,859
Location
NOVA
Website
www.capitallandcruiserclub.org
Quick question:

Can you use a FJ40 in place of an 80 series spindle for a trail repair?
Or are they too different.

Thanks for the help!

Cheers-
-Mike
 
I know a mini truck spindle will bolt on but as the mini truck spindle is a touch longer you have to use the mini truck wheel hub as well. Not being up on the 40 series stuff I would ASSume that the spindle/wheelhubs are the same between a later 40 series and a SA mini truck.

I have only gotten that far before I went looking for a new 80 series spindle, a mini truck spindle/wheel hub should work to get a rig of of a trail but without brakes or a birf installed at that corner.
 
I believe that the spindle to knuckle hole is much bigger in the 80 series and the 40's would be just to small to bolt to the knuckle of a 80.
 
If it's to get the boy home you can borrow a spindle from my truck - but you'll have to come and get it.
 
I believe that the spindle to knuckle hole is much bigger in the 80 series and the 40's would be just to small to bolt to the knuckle of a 80.

You made me question my memory so here you go; a mini truck spindle with a 80 series gasket being a perfect match (but a crappy cellphone picture) in size and bolt pattern:
24-05-08_1212.webp
 
Sweet, that may be a good thing to throw in as a trail spare. Thanks for the picture. I've got an FJ80 spindle coming now.
Cheers-
-Stump
 
Back
Top Bottom