Random Questions

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Apr 18, 2015
Threads
57
Messages
474
Location
Navarre FL
I disassembled the interior of the 80 today, with the intention to lay down new jute and possibly some deadening material. While I had her tore down, I noticed a few things I had questions about.

These three connectors beneath the center console, I'm assuming are for the factory refrigerator option?

W0ehDYUfOxlWGTDadntUycR9Ov8o9gVr2f-UDvrvScRII8RYLJx2XRcBg2zJ4y42P_iZnGvyiCZMHaRzBcvcb8h8uh9q4z7j2MI38e3qfJ18cQVBU-8LZve4lFp383pZrtZyo8-ANNoEQZDj_VAjcWWTO5C-d7QlrKJKb1_XjI27AxEI2QcRzh5GopUpebhBsXM2LIXQib5WuU7O53AlkM38e0I1tNk9rvhZSOPzQ-H8c5_uEohhuNlG2X9uaYzvJprLyC4i3fv9H0wHWAsHAtlkY6riBy0OqrqGS7rJ3u1hoklrYrJTi9gAfTUWUySNTtD6BiKa6dsipe_r_MxwNThS9qGxyzpLm8hn6f0FqgZoQN4wV-LGeD9K_GpBoVA9-6K6ftCxIdr0FUcACUGpiArgikPULJXajyeAfu_p5Cko2_QqSG6FhdxiuNkTU8PglAkPFkNwlZXhSWGSp2GZhFR1FXJHy8reIGlnwotz3mzCuepTnterUni8aLfHniUmOdzVQWE-p3w3rdC5ViWWb0O9ErDhSago59w-VCS3M2rV0AlVASHlj3GxUM0uaz_Y1rGzzKDCZ06hiy-LxSiXQy1ERyxKZ0lTY0i-TKV744chZ3B0=w534-h711-no



My shift lever has a little play in it. Is this normal? If not, can I tighten the bolt beneath it?



Finally, is this the location of the PHH (above and to the right of the yellow tab)? If so, it definitely needs to be replaced ASAP.

6GTPKQ4UnwAD7N7MdeoDjajnjAkvNuyL8SaJEX-IvdBwUI2PxNpcTGMgKRIwq7_JdYFBHYKd5Q=w534-h711-no
 
I didnt have spare plugs under the centre console when i did mine. Maybe a different model. Not sure about question 2 but question 3 is definitely the PHH.
 
#1 -- those might be connections for the seat heaters?
#2 -- pretty sure some play is normal, ours has been this way all along and still works
#3 -- I'm pretty sure the paired connecting hoses are for your rear heat lines. The PHH is over above the starter, just a single short hose fed from a single pipe that comes down from the top of the engine.
 
IMG_0999a.webp

PHH is the bulging hose with the rusting clamps indicated by the arrow, at least as far as I can tell.
 
Yep that's the PHH...so fun to replace!!!
 
The clamps on your PHH are factory originals, by the looks of it, it's way pass time to replace it. Take some time, and read some of the other members threads about how to replace your PHH. One more thing, make sure you follow their recommendations about either cutting, or bending that upper tab off that metal tube that connects to your PHH. The reason you need to do that, it's very difficult to turn a wrench on that bolt that holds the tube in place. Plus if you do manage to get that bolt off, and you want to put it back, it's beyond a bitch to re tighten.
 
Back
Top Bottom