Random Math Question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Jan 2, 2017
Threads
44
Messages
265
Location
Wyoming
I suck with maths. Does someone have the ratio of rise to run of the front windshield? I am going to 3d Print a holder for my cell phone so it can double as a dash cam. I can record my commutes and save to google drive (unlimited storage). Anyway, I was wondering if someone had the angle and could do a sin cos tan maths so I can get that going. I haven't found a good way to measure it, and I want to be within a degree or 2.
 
09F8BAA6-06DC-4B8A-99AA-08ED44CEB6DD.gif
 
Plumb bob and ruler would get you close enough if you want maths.

Or just a level app like @mudgudgeon suggested.
 
I'm a mechanical engineer (nerd), and while doing trigonometry is fun, and you'd get to use the Pythagorean theorem and a SideAngleSide law of sines equation, what @mudgudgeon said about phone app is the best bet. I have a free one on my phone - works great.

Just make sure your truck is on a roughly level surface when you do this (which you can check with your trusty phone angle app :-))
 
Can someone point me in the direction of the English version of Mud please?!
 
I'm a mechanical engineer (nerd), and while doing trigonometry is fun, and you'd get to use the Pythagorean theorem and a SideAngleSide law of sines equation, what @mudgudgeon said about phone app is the best bet. I have a free one on my phone - works great.

Just make sure your truck is on a roughly level surface when you do this (which you can check with your trusty phone angle app :))

Eggzackery!


Ps, no offence intended to yourself, or any other enginerds that may read this :flipoff2:
 
8E2AA474-4694-42C0-8E60-4E207E502830.webp
62B353CF-B9FE-4214-8D43-031FFAF0F088.webp


He could just take these pictures and put them on loop. Done.

Dude! There are no commutes worth recording in Wyoming!
:p
 
He's trying to figure out the angle of the dangle to build some do-hickey, thingamajig!
Everyone knows the angle of the dangle is equal to the crux of the biscuit.
 
Everyone knows the angle of the dangle is equal to the crux of the biscuit.

Nearly right, you forgot the input ratio of the cosmic torque flange converter.

Regards

Dave
 
^^^^ Well whats the answer its been 45 mins....... on edge of seat
 
It might be easier to buy a 3.99 holder from China..

Here comes the engineer that's going to overthink everything just to make a statement
 
It's annoying me so I'm just going to state it:

To get the angle, it is = invers tan (y/x) (y=rise, x=run). :D
 
Back
Top Bottom