NLFS Random Archived Classifieds
- Thread starter Webster
- Start date
This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.
- Status
Re: PTO Winch
It doesn't include the PTO, nor is it OEM. It is a Ramsey.
It doesn't include the PTO, nor is it OEM. It is a Ramsey.
Re: PTO Winch
*Just some more info for the buyer*
The Ramsey's do not use the PTO output of the transfer like the Toyota PTO, they use a special box that mounts behind the transfer, in between transfer output and driveshaft. Good luck finding one of those boxes!
*Just some more info for the buyer*
The Ramsey's do not use the PTO output of the transfer like the Toyota PTO, they use a special box that mounts behind the transfer, in between transfer output and driveshaft. Good luck finding one of those boxes!
Re: 33" MT'S AND 2.5" LIFT SHOCKS
Ive got some KYB shocks I pulled off mine when I went to a 5" Lift. They are in decent condition, no leaks.. How about $30.00 for all four? I had a 2.5" lift at the time so they will definitely work.. They have been sitting in my garage for 4 months. I'm in VA, but they shouldnt cost too much to ship..
Ive got some KYB shocks I pulled off mine when I went to a 5" Lift. They are in decent condition, no leaks.. How about $30.00 for all four? I had a 2.5" lift at the time so they will definitely work.. They have been sitting in my garage for 4 months. I'm in VA, but they shouldnt cost too much to ship..
Re: FJ40 drop tailgate
hey proffits,
could you email me, or post some details about the tailgates?
thanks,
jonathan
jmalphr@clemson.edu
hey proffits,
could you email me, or post some details about the tailgates?
thanks,
jonathan
jmalphr@clemson.edu
2f pan & fan
need oil pan and fan blade from a 2f (77ish).
need oil pan and fan blade from a 2f (77ish).
Re: 33" MT'S AND 2.5" LIFT SHOCKS
I have 5 almost new 9.50 - 33" BFG MT'S - Less than 200 miles on 4 of them 0 on one. I'm looking for $500.00 for the set. located in Green Bay WI.
I have 5 almost new 9.50 - 33" BFG MT'S - Less than 200 miles on 4 of them 0 on one. I'm looking for $500.00 for the set. located in Green Bay WI.
Re: 33" MT'S AND 2.5" LIFT SHOCKS
LITTLE OUT OF MY PRICE RANGE NOT TO MENTION I LIVE ON THE WEST COAST. UNLESS YOU WANT TO SWAP FOR MY PARTS?
LITTLE OUT OF MY PRICE RANGE NOT TO MENTION I LIVE ON THE WEST COAST. UNLESS YOU WANT TO SWAP FOR MY PARTS?
Re: 3 speed bellhousing....
I have one what is it worth? $50.00?, I live in Green Bay Wi.
I have one what is it worth? $50.00?, I live in Green Bay Wi.
WTB- 77 or later left/driver side Hardtop panel
I am looking for a 77 or later 40 series drivers side hardtop panel w/ glass and vent window.. would prefer as little rust as possible. Mine is ruuuussty and needs to be replaced. Help? Thanks
I am looking for a 77 or later 40 series drivers side hardtop panel w/ glass and vent window.. would prefer as little rust as possible. Mine is ruuuussty and needs to be replaced. Help? Thanks
Cruiserdrew
On the way there
WTB-Long side inner axle
Self explanatory-I would like a long side inner axle, fine spline to fit '76 FJ-40.
Self explanatory-I would like a long side inner axle, fine spline to fit '76 FJ-40.
Exhaust manifold
:'( I am in need of an exhaust manifold for my '74 fj-40. mine has an ear broken off the exhaust pipe flange. I belive '74 & '75 were the same. You can e-mail me if you want.
Thanks, Earl
:'( I am in need of an exhaust manifold for my '74 fj-40. mine has an ear broken off the exhaust pipe flange. I belive '74 & '75 were the same. You can e-mail me if you want.
Thanks, Earl
Re: 3 speed bellhousing....
i also have the bellhousing.if you need the fork,or anything else i have that too.
im assuming you need a cruiser 3spd bellhousing :dunno:.
25 bucks, plus shipping from 80012.
shawn
i also have the bellhousing.if you need the fork,or anything else i have that too.
im assuming you need a cruiser 3spd bellhousing :dunno:.
25 bucks, plus shipping from 80012.
shawn
Re: 2f pan & fan
someone on lcml is selling a plastic fan from a 79.
shawn :G
someone on lcml is selling a plastic fan from a 79.
shawn :G
Re: Exhaust manifold
:G Max, It's an F and 1/2, An inbetween, it has the 2-f oiling system, but the exhaust is bolted to the intake by 3 bolts, not 5, and the flange to the exhaust pipe is a 2 stud..
How are things in Wi., I'm from Milwaukee a long time ago, now living in Tucson Az. Earl
:G Max, It's an F and 1/2, An inbetween, it has the 2-f oiling system, but the exhaust is bolted to the intake by 3 bolts, not 5, and the flange to the exhaust pipe is a 2 stud..
How are things in Wi., I'm from Milwaukee a long time ago, now living in Tucson Az. Earl
- Status