radiator replacement

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Feb 7, 2003
Threads
402
Messages
13,956
Location
lebanon,pa
Website
www.facebook.com
noticed today that the rad should be replaced here soon.

been digging around with the search feature looking for an upgrade.
but from what i've seen the 93-94 rad is the one to have. however i've not been able to read why that is the rad to have. can anybody enlighten me?
 
Brian,
I think the older radiator is a 3 row brass radiator (with plastic tanks unfortunately) while the newer one is a 2 row aluminum (again w/ plastic tanks).
The older one works better at cooling according to everyone. Even though aluminum is better at cooling than brass, the omission of 3 rows is probably why the older one is preferred.

I am planning on replacing w/ an older brass model as well.
 
Brian,
I think the older radiator is a 3 row brass radiator (with plastic tanks unfortunately) while the newer one is a 2 row aluminum (again w/ plastic tanks).
The older one works better at cooling according to everyone. Even though aluminum is better at cooling than brass, the omission of 3 rows is probably why the older one is preferred.

I am planning on replacing w/ an older brass model as well.

I believe that is right... or you can spend some $$$ and get the aluminum one from MAF
 
believe me, if $900 was justifiable, I would get the Ron Davis aluminum. I was close to getting it but for around $400, OEM seems like it works just as well at cooling a stock motor.
 
Brian,
I think the older radiator is a 3 row brass radiator (with plastic tanks unfortunately) while the newer one is a 2 row aluminum (again w/ plastic tanks).
The older one works better at cooling according to everyone. Even though aluminum is better at cooling than brass, the omission of 3 rows is probably why the older one is preferred.

I am planning on replacing w/ an older brass model as well.



platsic tanks *hangs head low* that's what i was hoping to get away from. they work, but it's plastic.
alright 3 rows over 2, i can buy that.
 
platsic tanks *hangs head low* that's what i was hoping to get away from. they work, but it's plastic.
alright 3 rows over 2, i can buy that.

For other reasons I had to replace my core damaged radiator with the same OEM 3 row type and I keeped the "old" tanks because any deep inside the country third world run of the mill shop which of course doesn't stock spare parts, can in a emergency, solder a hole in my bronze core or replace any broken plastic tank so I carry them ( they take a lot less space than a whole radiator) when I do trips far away .
 
Last edited:
a brand spanking new rad was awaiting me upon my arrival home today:bounce::bounce:
i'm finding that opening these often times rather expensive boxs, to be a quite addicting feeling.
looking down on these genuine toyota replacement parts, is quite a rush. on top of that i totally enjoy getting greasey and grimmy to the elbow:popcorn:


ok and now on a serious note.
i'm more then likey going to offer my currently in place oem rad, free for the taking to a person that could use some help.
keeping mind that it's not perfect, but is oem 3 core brass.
as best i can tell it's the original 15 year old, 190k mile rad.
i will do a post in the classifieds when it's availible, but if somebody knows somebody it may speed me up alittle.
i've received carma in the past and 'am ready to try and give some back.
rad.webp
 
believe me, if $900 was justifiable, I would get the Ron Davis aluminum. I was close to getting it but for around $400, OEM seems like it works just as well at cooling a stock motor.

believe me, the $900 is justifiable if you are good at justifying all these things! :grinpimp: Although my original radiator was wonderful, with the MAF/RDR radiator, I really have to struggle to get the rig anything above 92- 94C. Plus its purrrty! :D Nothing against the OEM, especially against the big brass OEM; those are by far the best performance and price all around. My original radiator had 150K on it when I replaced it and it rarely ran over 98C - 100C even when really working hard. Only really replaced it because I justified that it was time to! :D:D:D :doh: :cheers:
RDR Radiator.webp
 
TH,

Guess you missed the part about "FREE for the taking"? It's a nice gesture.

DougM
 
Brian,

Please help me understand - why are you selling your 'old' radiator? Also, how much did you pay for the new one?

Thanks,

TH

i'm not selling anything.
i'm giving an oem rad away to somebody that really needs a rad.
right now at his point in my life i can afford to sink $1K worth of oem parts into the cooling system alone, on a 15 year old truck. this could all change tomorow, but today i'm living good.

i'm replacing it due to some weepage and seepage. like i said it's not perfect, but it does'nt leave a puddle either.
 
Last edited:
Just contact MAF to check availablity in the aluminum radiator. They mentioned it's a special order and it would take 1 month to get.

Do any of you kown of one available that's been purshased or not used? My radiator started to leak (actually looked like a fountain) at the top seams last night and need to get it replaced this week. Any thoughts? Thanks
 
Just contact MAF to check availablity in the aluminum radiator. They mentioned it's a special order and it would take 1 month to get.

Do any of you kown of one available that's been purshased or not used? My radiator started to leak (actually looked like a fountain) at the top seams last night and need to get it replaced this week. Any thoughts? Thanks

That's somewhat strange to hear; last time I talked to Steve-O he told me they had twelve of em in stock IIRC (that was when I purchased mine which was the, at the time, just recently released "Gen II" version). If it is truly the case that they don't have any and it is special order, I'd just call Ron Davis Racing and have em make it from their template and send it to you. Might be more $$$, but, little less wait (if THEY have some in stock already it might be a lot less wait). HTH. :cheers:
 
Interesting...either they're that popular, or maybe not in the computer system for some reason. I'll try again tomorrow and see if I get a different response. When did you purchase yours turbocruiser?
 
Interesting...either they're that popular, or maybe not in the computer system for some reason. I'll try again tomorrow and see if I get a different response. When did you purchase yours turbocruiser?

I honestly cannot remember! :o Did you talk to Steve specifically? If he says they're out, they're out for sure. I will say that unless you are Force Inducted (or over towing through incredibly hot weather), there is prolly no need for the all aluminum radiator; a new three row brass will be wonderful. In this case it might not be worth the wait for the RDR radiator and I would not repair the old one other than to "spare" it away. HTH. :cheers:
 
Back
Top Bottom