quick wheel question

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Just so I'm clear, I'm not asking if anyone is selling any, just wondering if they're made (I guess I would be interested if some were selling a set though).
 
welcome to the forum, there are lots of options for wheels, i was running eagle alloy 186's on my cruiser and am now running dick cepek DC-1 16" wheels. I think there is a link in the FAQ section about forum members wheels and tires with feedback which should help.

Also the wheel size you need is 6 bolt 5.5" spacing (6 on 5.5) with a minimum backspacing of 3.5- 3.65 depending on the particular wheel. You can run a wheel with less backspacing like 3" but it will push the wheel further out away from the vehicle.

By the way there is a search button that you can use to help, the forum gets filled with lots of questions like this that get answered weekly and it does tend to tick a few people off sometimes.
Good Luck!
 
If I recall correctly, I don't believe a 15" rim will fit due to interference with the brake caliper.
 
15 inch wheels will contact the rear brake calipers.
 
Thanks for the response. The caliper contact was my thought as well. I tried the search and did not find an answer, but maybe I'm not doing it right. Just as a learning experience, could someone tell me the proper word(s) to enter to get the desired response? And then as an example tell me which thread to look to? I've tried these searches and read through contless threads that include the words (such as "15" wheel 80 series") and never really found what I was looking for. Any insight would be greatly appreciated.
 
Back
Top Bottom