questions for the resto

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Dec 9, 2004
Threads
101
Messages
1,454
Location
The West
hi i have a few queestion for my resto that im doing.

1. for a saginaw setup on a 2f what size pulley do i need?

2. will stock height and stock wheels with 30 inch tires work with my power stering setup or will it be to squirly on the road. just need opinion if any one has driven with that setup.

3. witch is more reliable ( in opinions) the clutch from centerforce or the oem clutch?

4. will newer style lower dash pads work with the 70 and older dash? this is for a stereo mount i am thinking.

5. does anybody know of the stereo covers that flip up when you turn on your ignition? I can't seem to find them

and does anybody have a set of late model doors they don't want?

thanks

all opinions welcome
 
2. will stock height and stock wheels with 30 inch tires work with my power stering setup or will it be to squirly on the road. just need opinion if any one has driven with that setup.

I haven't driven that, but with 31x9.5 swampers, a stock steering wheel and no power steering I can one-hand out of a parking space.

Honestly, I don't know that it would be squirrely, but it's going to be ridiculously easy to steer. At least you won't have to worry about wearing out the components. :)
 
I have 30 inch tires, and without PS I can also turn pretty easy, and it's not really squirrelly either. The original clutch lasted me 31 years, so I think it might be good enough for another 31 ;) What year are we talking about here? BTW, if you need a 1975+ rear tire carrier on the drivers side I have an excellent condition one that I'm willing to part with. As far as stereo goes, not many fit as I've found out.
 
hi i have a few queestion for my resto that im doing.

1. for a saginaw setup on a 2f what size pulley do i need?

2. will stock height and stock wheels with 30 inch tires work with my power stering setup or will it be to squirly on the road. just need opinion if any one has driven with that setup.

3. witch is more reliable ( in opinions) the clutch from centerforce or the oem clutch?

4. will newer style lower dash pads work with the 70 and older dash? this is for a stereo mount i am thinking.

5. does anybody know of the stereo covers that flip up when you turn on your ignition? I can't seem to find them

and does anybody have a set of late model doors they don't want?

thanks

all opinions welcome

1.AFAIK, MAF is the only one currently offering the full-width pulley for the Saginaw pump. Billet aluminum. As we all know, billet =$$$

2. If it's not squirly now, it won't be squirrly when you're done with the Sag either.

3. OEM is fine

4. Dash controls for the 4wd are located behind the spot that later cruisers used for the stereo. You might want to have a look behind there first.

:cheers:

Mark A.
 
4. will newer style lower dash pads work with the 70 and older dash? this is for a stereo mount i am thinking.

I did the exact opposite....old style dash pad on a 78...to cover up the CD opening.

You will have to drill a few holes...I believe three...shouldnt matter because they will be covered by the pad. Other than that It should fit perfectly.
 
awsome thanks Mountaincruiser. i am just curious because my old tires before the resto were 32x11.5 s and tey were fat and would be perfect fo ra sag conversion but i am going back to the stock wheels with 30 in pizza cutters and am wondering if any body that has that setup or has driven that setup knows if it might be two squirly.

thanks
 
Back
Top Bottom