Push bar fitment

This site may earn a commission from merchant affiliate
links, including eBay, Amazon, Skimlinks, and others.

Joined
Oct 27, 2018
Threads
4
Messages
11
Location
J0X 2W0
Good day all!

My buddy has a spare push bar for his 4th Gen 4runner that he's willing to give me if it fits on my 1993 fzj80. I haven't looked at mounting options, but I was wondering if any of you know how much modification would be needed. I attached a picture of his runner with the bumper mounted, (far right) and my cruiser in the middle

Thanks everyone 👍
 
1977856
 
Your pictures aren't showing up. Most push bar/brush guard things mount to the bottom of the frame rails so you can probably measure those and see how close they are. I'm betting it's going to look pretty bad since the 4th gen has a pretty pronounced front bumper while the 80 is pretty flat. The shape will be all off.

I don't know where you are but I have a brush guard for an 80 for sale.
 
So lads I now realize that the picture won't upload. Thanks for the input, I'll try posting on FB, maybe itl accept the photo
 
Your pictures aren't showing up. Most push bar/brush guard things mount to the bottom of the frame rails so you can probably measure those and see how close they are. I'm betting it's going to look pretty bad since the 4th gen has a pretty pronounced front bumper while the 80 is pretty flat. The shape will be all off.

I don't know where you are but I have a brush guard for an 80 for sale.
I'm in Qc, Canada
 
I would forego the push bar. To me it is more of a damage multiplier than anything. You rearend a car in front of you and instead of bruising your bumper now you damaged your headlights, grill, and hood. Just my $.02
 
Depends on what he's calling a push bar. If its a brush guard then i agree its worse than worthless. If its a small hoop bar attached to the frame then maybe not. Pics would be needed.
 
Back
Top Bottom